Operation Manual

Mastering
Your
BERNINA
®
BERNINA
®
/bernette
®
Sewing Machines
MASTERING YOUR BERNINA
®
/bernette
®
SEWING MACHINE 8/05
178
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Trailing Tulip Vines
(artista 730 only)
Fabric ................................................................. chamois, 8” x 12”
Stabilizer ....................................... heavyweight tear-away, 8” x 12”
Needle ................................................................ 90/14 Embroidery
Thread ................................................30 weight cotton embroidery
Presser Foot ....................................... Sideways Motion Foot #40C
Stitch ......................................................................... as indicated
Needle Position ..................................................................... center
Place stabilizer behind fabric, bonding with a light application of
HRFive spray adhesive. Mark a large + shape on the fabric as a
reference guide.
Program the following stitches in Combi Mode:
- stitch #137* + Up/Down Mirror Image
- stitch #145
- stitch #39, direction 6 - 1x
- stitch #145 + Up/Down Mirror Image
- stitch #137
- stitch #39, direction 10 - 1x
- stitch #145 + Up/Down Mirror Image
- stitch #137
- stitch #39, direction 6 - 1x
- stitch #137 + Up/Down Mirror Image
- stitch #145
- stitch #39, direction 10 - 1x
Save the stitch combination.
Stitch from one end of the fabric to the other, guiding fabric so that
the “+” stays parallel and perpendicular to the presser foot.
Stitch additional rows of this stitch combination, scrolling through
the stitches to start at different points.
Note: Some adjustments to stitch combination formulas may be
necessary depending on the fabric, thread, and stabilizer used to
create the stitch sample.