Operation Manual

Mastering
Your
BERNINA
®
BERNINA
®
/bernette
®
Sewing Machines
MASTERING YOUR BERNINA
®
/bernette
®
SEWING MACHINE 8/05
186
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Directional Quilting
(artista 730 only)
Fabric ............................. two pieces cotton quilting fabric, 4” x 12”
Stabilizer ........................... cotton needle-punched batting, 4” x 12”
Needle ................................................................ 90/14 Embroidery
Thread ................................................30 weight cotton embroidery
Presser Foot ....................................... sideways Motion Foot #40C
Stitch ...................................................... directional straight stitch
Needle Position ..................................................................... center
Affix the batting to the back of the fabric with a light application
of HRFive spray adhesive. “Baste” the backing to the other side
of the batting in the same manner to create a “quilt sandwich.”
Select Combi Mode. Program the following stitch combination:
• stitch #39, direction 8, 1x,
• stitch #39, direction 4, 2x,
• stitch #39, direction 8, 3x,
• stitch #39, direction 12, 2x,
• stitch #39, direction 8, 2x,
Insert a Sub-Divider 1.
Program the following stitch combination:
• stitch #39, direction 8, 2x,
• stitch #39, direction 12, 1x,
• stitch #39, direction 8, 1x,
• stitch #39, direction 4, 1x
Save to an empty file drawer.
Draw a line from one end of the fabric to the other, marking the
center of the fabric. Engage Pattern Repeat 1X and stitch each
stitch combination one time, aligning the center of the presser foot
with the drawn line at the beginning of each line of stitching, and
keeping the foot parallel to the line as the fabric moves from side
to side under the foot.
Trim and mount the sample.