Operation Manual

Mastering
Your
BERNINA
®
BERNINA
®
/bernette
®
Sewing Machines
MASTERING YOUR BERNINA
®
/bernette
®
SEWING MACHINE 8/05
188
Notes
©2005 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Directional Baubles
(artista 730 only)
Fabric .................................................. firm, woven fabric, 8” x 12”
Stabilizer ....................................... heavyweight tear-away, 8” x 12”
Needle ................................................................ 90/14 Embroidery
Thread ................................................30 weight cotton embroidery
Presser Foot ....................................... Sideways Motion Foot #40C
Stitch ......................................................................... as indicated
Needle Position ..................................................................... center
This is a fun and different way to use the artista 730’s directional
capabilities. It makes use of the Sub-Divider 2 feature, which acts
as a stop within a combination. A Sub-Divider 2 also allows you
to continue sewing other parts of a stored stitch combination.
• Select Combi Mode. Program the following combination of stitches:
- stitch #654, stitch length = 2mm
- stitch #651
- stitch #654, SL=2, Up/Down Mirror Image
- Sub-Divider 2
- stitch #39,
direction 4- 3x
- Sub-Divider 2
- stitch #431
- Sub-Divider 2
• Save to an empty file drawer.
• Place the stabilizer under the fabric.
• Begin sewing the motif. After the first three patterns have been
stitched the artista 730 will automatically stop at the Sub-Divider 2.
• Release the foot control, then begin sewing again. The artista 730
automatically moves to the directional section of the combination,
then stops at the next Sub-Divider 2.
• Release the foot control. Raise the presser foot and pivot the fabric
180º. Resume stitching; the next stitch pattern stitches over the
previous directional stitching. Again, the artista stops automatically
at the end of the stitch pattern.
• Pivot 90º and continue sewing the combination as shown.
• Repeat to create an interesting linear embellishment.
• Trim and mount sample.