Operation Manual

Mastering

Your

BERNINA

/bernette

Sewing Machines

MASTERING YOUR BERNINA

/bernette

SEWING MACHINE 8/05

Notes

Dealers

Fabric ................................................... firm, woven fabric, 4” x 6 ”

Needle ................................................................90/14 Embroidery

Thread ......................... 30 wt. cotton embroidery, contrasting color

Presser Foot ........... BERNINA

Reverse Pattern Foot #1 or #1C

......................................... bernette

Zigzag/Universal Foot

Stitch ........................................................................ zigzag stitch

Needle Position .................................................. center or far right

Zigzag/Oversewing Edges

Select the Zigzag Stitch (width = 4, length = 2).

Finish one 6” edge using the following steps.

Guide edge of fabric under the middle of the presser foot – or –

Move needle position to far right; sew using the inside edge

of the right toe as a guide.

The needle should go into the fabric on one stroke of the needle

and over the edge on the next stroke.

Do not use too long a stitch or too wide a stitch; the edge should

lie flat, not roll.

Match the weight of the thread to the weight of the fabric.

Trim and mount the sample.