Brochure

20 21
TELECOM ELECTRONIC SERVICE CASE 6600
The actual case with special tools and testing instruments for the installation
and maintenance of complex telecommunication systems
Case made from deep-drawn, impact-resistant, grained black plastic, with a sturdy aluminium frame, dustproof and rainproof, acid- and scratch-re-
sistant. With 106 tools the case contains a complete equipment of tools especially for the electrical and electronical connecting and maintenance
operations at distribution boards in the telecommunication technique. The tools are clearly arranged in the case on 3 removable tool trays and in a
stable plastic tray in the bottom of the case that grants by adjustable partitions additional place for further instruments.
No. Description of individual tools
2-265 2 test prods, red and black, extremely slim, pointed and flexible,
blade made from 1 mm steel wire
2-275 Repair mirror, stainless, magnifying, concave mirror 21 mm Ø,
with BERNSTEINIT handle
2-601 IC-tweezers, nickel-plated, 125 mm, for gripping, inserting and
removing IC´s
2-620 PLCC-extractor
2-655 Pocket inspection lamp, watertight, with pre-focused reflector
2-701 Insertion tool with sensor, for connecting the wires and
simult aneously cutting off the residual wire
3-127-2 „Slimline“ side cutters, 115 mm, for soft wire only up to 1.0 mm,
extremely slim head, box joint, compression spring, chrome-plated,
with transparent insulation
3-135-16 Side cutters, 175 mm, verchromt mit Abisolierfunktion für ein-
und mehrWireige Leiter, 1,5 mm² und 2,5 mm², mit zweifarbigen
Handschutzhüllen
3-235-16 Telephon pliers, 160 mm, chrome-plated, with bicoloured hand guard
3-532-16 Flat nose pliers, 160 mm, with long jaws, chrome-plated, with bicoloured
hand guard
3-574-6 Water pump pliers, 175 mm, made from chrome vanadium, red insulation
3-732-16 Combination pliers, 160 mm, chrome-plated, with bicoloured hand guard
3-0605 Combination crimping pliers, 200 mm, for connector types 6P/6C, 6P/
4C, 6P/2C, 8P/8C
4-370
Watchmaker´s screwdrivers from metal, 6-piece set, in metal box, 1.0, 1.5, 2.0,
2.5, 3.0, 3.5 mm
4-407 Retaining screwdriver, for inserting slotted screws, nickel-plated,
blade 110 x 4.0 mm
4-437 Retaining screwdriver, for inserting and tightening cross-recess
screws size 1, nickel-plated, insulated, blade length 150 mm
4-522 Electrican screwdriver with multi component handle, blade made from
chrome vanadium, chrome plated, black tips 100 x 3.0 mm
4-523 Electrican screwdriver with multi component handle, blade made from
chrome vanadium, chrome plated, black tips, 100 x 4.0 mm
4-524 Electrican screwdriver with multi component handle, blade made from
chrome vanadium, chrome plated, black tips 125 x 5,5 mm
4-532 Cross-recess screwdriver with multi component handle, blade made from
chrome vanadium, chrome-plated, with black tip , blade length 60 mm, size 0
4-533 Cross-recess screwdriver, as above, blade length 80 mm, size 1
4-534 Cross-recess screwdriver, as above, blade length 100 mm, size 2
4-535 Cross-recess screwdriver, as above, blade length 150 mm , size. 3
4-643 Screwdriver, with conductive handle, blade made from chrome vanadium,
chrome-plated, 260 x 3.0 mm, with black tip
4-656 Cross-recess screwdriver, size 1, with conductive handle, blade made from
chrome vanadium, chrome-plated, blade length 300 mm, with black tip
4-657 Cross-recess screwdriver, size 2, with conductive handle, blade made from
chrome vanadium, chrome-plated, blade length 300 mm, with black tip
14-651
VDE
Screwdriver, with VDE safety insulation, blade 75 x 2.5 mm
No. Description of individual tools
14-652
VDE
Screwdriver, with VDE safety insulation, blade 100 x 3.5 mm
14-682
VDE
Cross-recess screwdriver, size 1, with VDE safety insulation,
blade length 80 mm
14-683
VDE
Cross-recess screwdriver, size 2, with VDE safety insulation,
blade length 100 mm
5-107 Engineer´s tweezers, made from steel, with bent tips, 150 mm, nickel-plated
5-117 Engineer´s tweezers, made from steel, straight-flat-wide, 145 mm, nickel-plated
5-122 Engineer´s tweezers, made from steel, straight, with narrow pointed
tips, 155 mm, nickel-plated
5-240 Warding files, 6-piece set, with wooden handles, in plastic wallet
5-505 Insulation stripping tool, with hookblade, for cable 4 - 28 mm Ø
16-299
VDE
Socket wrench, with VDE insulation , blade made from chrome vanadium,
chrome plated A/F 4.0 mm
16-301
VDE
Socket wrench, with VDE insulation, blade made from chrome vanadium,
chrome plated A/F 5.0 mm
16-302
VDE
Socket wrench, with VDE insulation, blade made from chrome vanadium,
chrome plated A/F 5.5
6-320 Socket wrench-set, 1/4“ square drive, chrome vanadium, chrome plated,
15-piece set in a metal case, 11 sockets from 4.0 - 13.0 mm,
holder, universal joint, reversible ratchet, rigid extension
6-500-12 Double open-ended wrench, 12 x 13 mm, chrome vanadium, chrome-plated
6-500-18 Double open-ended wrench, 18 x 19 mm, chrome-vanadium, chrome-plated
6-600 Combination ring-and open-ended wrench, 7-piece set, 6.0, 7.0, 8.0, 9.0, 10.0,
11.0, 13.0 mm, chrome vanadium, chrome-plated
6-600-12 Open-ended wrench, CV, chrome-plated, 12 mm
6-600-17 Open-ended wrench, CV, chrome-plated, 17 mm
6-600-19 Open-ended wrench, CV, chrome-plated, 19 mm
6-820 Hexagon wrench, 8-piece set in a case, 1,5 - 2,0 - 2.5 - 3.0
4,0 - 5,0 - 5.5 to 6.0 mm
6-950 Ballpoint wrench keys, hexagon,
8-piece set, in a wallet, 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0 mm
6-995 TORX-screwdrivers with bore hole in the tip,
8-piece set, in a box, T 9, T 10, T 15, T 20, T 25, T 27, T 30, T 40
7-114 Engineer´s hammer, 200 g
7-425 Duster
7-429 Insulating tape
7-506 Roller tape, 2 m
7-616 Pocket saw, with adjustable wooden handle, in a wallet
8-110 ERSA-fine soldering iron, Tip 260 BN/230 V/16 W
8-385 ERSA OVAC desoldering pump
8-407 Solder wire spool, 250 g, 0.8 mm Ø
9-316/5 5 Chip-Container, conductive box with lid, black, internal dimensions:
118 x 32 x 14 mm
BERNSTEIN
®
TOOLS FOR ELECTRONIC
6600 teLecom with tool set
6615 teLecom without tool set
Outside dimensions: 490 x 410 x 190 mm Weight without tool set: ca. 5.800 kg Weight with tools : ca 12.900 kg