Brochure
26 27
No. Description of individual tools
2-166 Contact cleaner, made from glass fibre, 115 mm
2-265 2 Test prods, red and black, extremely slim, pointed and flexible,
blade made from 1 mm steel wire, 155 mm
2-295 Hand magnifier with light
3-565 Water pump pliers, 130 mm, chrome-plated
4-351 Offset screwdriver, chrome vanadium, nickel-plated, 100 x 5 mm
4-407 Retaining screwdriver, 110 x 4 mm
4-522 Electrican screwdriver with multi-component handle chrome-plated,
with black tip, 100 x 3.0 mm
4-523 Screwdriver with multi-component handle, chrome-plated, with black tip
100 x 4.0 mm
4-542 Cross-recess Screwdriver with multi-component handle chrome-plated,
with black tip, Pozidriv, size 0
4-543 Cross-recess Screwdriver, as above, Pozidriv, size 1
5-161 Clamping scissors, 130 mm, stainless
5-301 Special scissors for cutting sheet-metal and wires, with serration,
extremely slim, 110 mm, nickel-plated
6-771 Adjustable wrench, jaw opening 0 - 12 mm, total length 100 mm
6-984 L TORX-Screwdriver, with multi-component handle chrome-plated,
with black tip, size T 9 with hole
No. Description of individual tools
Tool tray No. 7010
2-155 Claw-type gripper with 3 wire claws and clip
2-601 IC-tweezers, nickel-plated, 125 mm, for gripping, inserting
and removing IC‘s
2-620 PLCC-extractor
2-655 Pocket inspection lite with fibre optic adaptor for close inspection
of small, tight, hard-to-see areas
3-654-15 EUROline-side-cutters, 120 mm, for hard wire up to 0.4 mm Ø,
for copper wire up to 1.5 mm Ø, with slim rounded head, box joint,
double leaf spring, bright burnished, with bicoloured hand-guard
3-672-15 EUROline-end-cutters, 130 mm, for copper wire up to 0.6 mm Ø,
cutting edge 20° angular, box joint, double leaf spring, bright
burnished, with bicoloured hand-guard
3-682-15 EUROline-flat nose pliers, 130 mm, extremely slim, box joint,
double leaf spring, bright burnished, with bicoloured hand-guard
3-683-15 EUROline-snip nose pliers, 130 mm, extremely slim, box joint,
double leaf spring, bright burnished, with bicoloured hand-guard
4-603 Screwdriver with conductive handle, blade from chrome
vanadium, chrome-plated, 40 x 1.5 mm
4-605 Screwdriver with conductive handle, as above, 40 x 2,0 mm
4-606 Screwdriver with conductive handle, as above, 50 x 2,5 mm
4-607 Slotted screwdriver as above, 50 x 3.0 mm
4-608 Slotted screwdriver as above, 60 x 3.5 mm
4-621 Cross-recess screwdriver, as above, size 000
COMPACTMOBIL ELECTRONIC SERVICE CASE 7000
The trolley case with special tools for the assembly and maintenance of electronic devices
7000 COMPACT-MOBIL with tool set 7010, 7020 und 7030
7015 COMPACT-MOBIL without tool set
7100 COMPACT-MOBIL with tool set 7010, 7020 und 7060
Description
Elegant case made from deep-drawn, impact-resistant, grained dark brown plastic with a continuous bronze anodised aluminium frame, dustproof
and rainproof, acid-resistant, scratch-resistant and non-slip. For energy saving transport stable rolls are installed and a telescopic handle is
mounted. The arrangement of the rolls results in a vibration absorbing locomotion. The tools are held in their partitions. The case has 3 removable
tool trays: No. 7010, 7020 and 7030. The trays contain 62 tools. On request the tray No. 7030 may be exchanged for No. 7060 (VDE-tools). The lid
of the case has a pocket for documents etc. The plastic tray with adjustable partitions in the bottom allows a clear arrangement of a soldering iron,
measuring instruments and accessories of various sizes. The case has two locks.
Outside dimensions: 500 x 400 x 200 mm Weight without tool set: 8.000 kg Weight with tools: 10.600 kg
BERNSTEIN
®
TOOLS FOR ELECTRONIC
4-622 Cross-recess screwdriver, with dissipative handle,
blade from chrome vanadium, chrome-plated, size 00
4-623 Cross-recess screwdriver, with dissipative handle,
blade from chrome vanadium, chrome-plated, size 0
4-624 Cross-recess screwdriver, as above, size 1
5-049 Watchmaker‘s tweezers, 110 mm, stainless, sharply-pointed
5-107 Engineer‘s tweezers, made from steel, with bent tips, 150 mm,
nickel-plated
5-115 Heat dissipating tweezers, 165 mm, nickel-plated, for use when
soldering transistors, gold-bonded diodes etc.
5-117 Engineer‘s tweezers, straight-flat-wide, 145 mm, nickel-plated
5-191 ESD tweezers, 120 mm, conductive, with straight, rounded tips
5-194 ESD tweezers, 120 mm, conductive, with bent, pointed tips
Tool tray No. 7020
1-735 Adjusting screwdriver handle, double-ended, for blades with 3 mm Ø
1-738 Special hard plastic bit, blade Ø 3 mm, tip 1.5 x 0.5 mm
1-739 Special hard plastic bit, blade Ø 3 mm, tip 3.0 x 0.5 mm
1-909 Engineer‘s mirror, with handle, made entirely from BERNSTEINIT
2-126 Desoldering lever, slotted at one end, with plastic handle
2-127 Tin knife, with plastic handle, 115 mm
2-132 Spring hook, nickel-plated and insulated, 175 mm
2-161 Magnetic bar with double ball- and socket joint, slewable, 215 mm
6-985 L TORX-Screwdriver, with multi component handle, blade made from chrome
vanadium, chrome-plated, black tip, size T 10 with hole
6-986 L TORX-Screwdriver, as above, size T 15 with hole
7-425 Dust brush
Tool tray No. 7030
3-133-16 Side cutters, 145 mm, für harden Wire bis 1.25 mm Ø, für soften Wire bis
2,5 mm Ø, verchromt, mit zweifarbigen Handschutzhüllen
3-235-16 Telephon pliers, 160 mm, chrome-plated, with bicoloured hand guard
3-732-16 Combination pliers, 165 mm, chrome-plated, with bicoloured hand guard
4-344
VDE
Voltage tester, for 220 - 250 V, blade 100 x 3.5 mm
4-504 Workshop screwdriver with multi component handle, blade made from
chrome vanadium, chrome-plated, with black tip, 100 x 5.5 mm
4-506 Screwdriver, as above, blade 125 x 6.5 mm
4-508 Screwdriver, as above, blade 150 x 8.0 mm
4-533 Cross-recess screwdriver, as above, blade length 80 mm, size 1
4-534 Cross-recess screwdriver, as above, blade length 100 mm, size 2
5-0605 Universal stripping tool
6-105 Socket wrench, with special square BERNSTEIN handle,
blade made from chrome vanadium, chrome-plated, 5.5 mm A/F
6-107 Socket wrench, as above, 7.0 mm A/F