Brochure

12 13
MULTI ELECTRICIAN‘S CASE 56OO
The handy, spacious electrician‘s tool case
Stable case made from best, black, grained cowhide. The handle is slotted through the flap, thereby distributing the load over the entire area of the
cover. When opening, the side flaps are held by bands. This enables the user to survey all the tools easily. 41 tools are held by compartments. In the
bottom of the case is a metal tray which may carry additional tools.
The case edges are especially reinforced by aluminium profiles. On both sides are loops for fasten a carrying strap. The case has 2 locks.
No. Description of individual tools
3-133-16 Side cutters, 130 mm, for hard wire, chrome-plated
with BERNSTEINIT insulation
3-235-16 Telephone pliers, 160 mm, chrome-plated, with bicoloured hand guard
3-575-6 Water pump pliers, 240 mm, nickel-plated, with insulation
3-732-16 Combination pliers, 165 mm, chrome-plated, with
bicoloured hand guard
3-815-16 Wire strippers, 155 mm, chrome-plated, with bicoloured hand guard
4-311 Screwdriver for grub screws with plastic handle, blade made from chrome
vanadium, nickel-plated, 80 x 2.8 mm
4-344
VDE
Voltage tester, blade 100 x 3.5 mm
14-653
VDE
Screwdriver, blade 100 x 4.0 mm, VDE safety insulation
14-654
VDE
Screwdriver as above, blade 125 x 5.5 mm
14-656
VDE
Screwdriver as above, blade 150 x 6.5 mm
14-682
VDE
Cross-recess screwdriver, as above, size 1
14-683
VDE
Cross-recess screwdriver as above, size 2
5-107-6 Engineer‘s tweezers with fine, bent tips, 150 mm, nickel-plated, strong
PVC-insulated
5-117-6 Engineer‘s tweezers, straight, flat and wide, 145 mm, nickel-plated, strong
PVC-insulated
No. Description of individual tools
5-271 Workshop file, 200 mm, flat and blunt, with wooden handle
5-274 Workshop file, 200 mm, half-round, with wooden handle
5-309 Cable-stripping scissors, 190 mm, stainless, with plastic handles
5-501 Cable knife
5-505 Wire-stripping knife, with hookblade, for cable 4 - 28 mm Ø
6-820 8-pieces set offset hexagon key wrenches,1.5 to 6 mm A/F, in plastic case
7-405 Spatula with wooden handle, blade width 50 mm
7-116 Engineer‘s hammer, 300 g
7-202 Firmer chisel, blade width 16 mm
7-235 Flat chisel, chrome vanadium, 200 x 16 x 20 mm
7-255 Electrician‘s chisel, chrome vanadium, 200 x 8 x 10 mm
7-303 Twist gimlet, 3 mm Ø
7-306 Twist gimlet, 6 mm Ø
7-316 Punch, with plastic handle, 6 mm Ø
7-410 Slicker trowel, with round shank, blade width 16 mm
7-415 Rubber beaker for plaster, round
7-502 Folding rule, 2 m
7-535 Spirit level, 220 mm, with 3 levels: horizontal, vertical and 45° angle
7-616 Pocket hack saw „Puk“ with adjustable wooden handle, saw blade
and plastic wallet
BERNSTEIN
®
TOOLS FOR ELECTRONIC
5600 mULti with tool set
5615 mULti without tool set
Outside dimensions: 435 x 340 x 210 mm Weight without tool set: ca. 4.300 kg Weight with tools: ca. 8.350 kg