Brochure

16 17
TECHNIC 64OO ELECTRONIC SERVICE CASE 6400
A toolcase as a bordcase for the travelling engineer
The unique design of this case caused by the compact shape and the structured surface guarantees a solution of highest sturdiness.
The case body is made of X-ABS plastic which is covered by an extreme antislip and scratch-resistant lamination as an excellent protection against
external influences. The ergonomical shaped handle together with the special hinges with topcase lock completes the picture of a high functional
and modern tool case.
The removable tool trays made of ConPearl ® with sewed pouches from imitation leather are sturdy, washable and exchangeable.
The 60 mm high bottom plastic tray is divided by adjustable partitions.
Tool set 6400 consists of the following 75 tools:
No. Description of individual tools
1-909 Engineer‘s mirror, with handle, made entirely from BERNSTEINIT
2-126 Desoldering lever, slotted at one end, with plastic handle
2-127 Tin knife, with plastic handle, 115 mm
2-128 Tin scraper, with plastic handle, 115 mm
2-132 Spring hook, nickel-plated and insulated, 175 mm
2-145 Screwdriver with guide sleeve for slotted axles up to 3.2 mm Ø
2-161 Magnetic bar with double ball- and socket joint, slewable, 215 mm
2-265 2 Test prods, red and black, extremely slim, pointed and flexible,
blade made from 1 mm steel wire
2-601 IC tweezers, nickel-plated, 125 mm, for gripping, inserting and
removing IC‘s
3-127-2 „Slimline“ side cutters, 115 mm, for soft wire only up to 1.0 mm,
extremely slim head, box joint, compression spring, chrome-plated,
with transparent insulation
3-132-16 Side cutters, 130 mm, chrome-plated, for hard wire up to 1.0 mm,
for soft wire up to 2.0 mm, with bicoloured hand guard
3-461-2 Round nose pliers, 130 mm, slim, box joint, compression spring,
chrome-plated, with transparent insulation
3-462-2 Flat nose pliers, 130 mm, slim, box joint, compression spring,
chrome-plated, with transparent insulation
3-481-2 Snipe nose pliers, 120 mm, angular, box joint, compression spring,
chrome-plated, with transparent insulation
3-565 Miniature water pump pliers, 130 mm, chrome-plated
3-732-16 Combination pliers, 160 mm, chrome-plated, with bicoloured hand guard
3-761-10 Special assembly pliers for clamping rings, 1.5 mm – 2.8 mm,
140 mm, burnished, with adjusting screw
4-261 Cross-recess screwdriver, size 01, with plastic handle,
blade made from chrome vanadium, nickel-plated, 25 mm long
4-301 Miniature screwdriver, with plastic handle, blade nickel-plated, 40 x 1.8 mm
4-311 Screwdriver for headless screws, with two hand guard plastic handle, blade
made from chrome vanadium, nickel-plated, 80 x 2.8 mm
4-321 Chubby screwdriver, with two hand guard plastic handle, blade made from
chrome vanadium, nickel-plated, 25 x 4.0 mm
4-343
VDE
Voltage tester, insulated blade, made from chrome vanadium, 60 x 3 mm
4-351 Offset screwdriver, chrome vanadium, nickel-plated, 100 x 5 mm
4-366 Cross-recess watchmaker‘s screwdriver, size 00
4-391 Watchmaker‘s screwdriver, nickel-plated, with 4 interchangeable
blades, 1.5, 2.0, 2.5, 3.0 mm
No. Description of individual tools
4-407 Retaining screwdriver, 110 x 4 mm
14-651
VDE
Screwdriver, with VDE safety insulation, blade, 75 x 2.5 mm
14-653
VDE
Screwdriver, as above, blade 100 x 4.0 mm
14-654
VDE
Screwdriver, as above, blade 125 x 5.5 mm
14-691
VDE
Cross-recess screwdriver, Pozidriv, size 0, with VDE safety
insulation, blade, 60 mm long
14-692
VDE
Cross-recess screwdriver, Pozidriv, as above, size 1, 80 mm long
5-006 Component tweezers, nickel-plated, with insulated jaws, for easy
insertion and removal of plug-in transistors of various sizes
5-049 Watchmaker‘s tweezers, 110 mm, stainless, sharply-pointed
5-107 Engineer‘s tweezers, made from steel, with bent tips, 150 mm, nickel-plated
5-115 Heat dissipating tweezers, 165 mm, nickel-plated, for use when
soldering transistors, gold-bonded diodes etc.
5-117 Engineer‘s tweezers, straight-flat-wide, 145 mm, nickel-plated
5-161 Clamping scissors, 130 mm, stainless
5-181 Wire scraper, for wires 0.6 mm Ø, interchangeable cutters
5-210 Needle files, 6-piece set
5-301 Special scissors for cutting sheet-metal and wires, with serration,
extremely slim, 110 mm, nickel-plated
5-501 Cable knife
5-531 Automatic wire stripper super
6-200 Socket spanner set, chrome vanadium, nickel-plated, 1 plastic
handle, 7 socket spanners, 4.0, 5.5, 6.0, 7.0, 8.0, 9.0, 10.0 mm
6-750 Special open-end wrenches, 6-piece set, nickel-plated, material
thickness 1.5 or 2 mm, 3 x 3.5, 4 x 4.5, 5 x 5.5, 6 x 6.5, 7 x 8, 9 x 10 mm
6-820 Set of allen hex sockets, 8 pieces, in plastic wallet, 1.5, 2.0, 2.5,
3.0, 4.0, 5.0, 5.5, 6.0, mm
7-425 Dust brush
7-435 Plastic-oiler, with screwcap made from brass
7-508 Steel tape measure, 30 cm, stainless
7-511 Digital caliper square, stainless, measuring range 150 mm,
LCD-display mm/inches, depth-gauge, cross-points, in a wallet
7-616 Pocket saw, in a wallet
BERNSTEIN
®
TOOLS FOR ELECTRONIC
6400 technic with tool set
6415 technic without tool set
6400 r troLLey with tool set
6415 r troLLey without tool set
Outside dimensions: 450 x 340 x 190 mm
Weight without tool set: ca. 4.500 kg
Weight with tools: ca. 7.400 kg
Outside dimensions: 450 x 340 x 200 mm
Weight without tool set: ca. 5.300 kg
Weight with tools: ca. 9.200 kg
001
002
003
003
003
002
001
002
002
002
001