SURVEY MARKING PRODUCTS BERNTSEN ® | THE SOURCE FOR YOUR SURVEY PRODUCT NEEDS RFID RFID RFID YOUR YOUR YOUR ENABLE Monuments See page 34 for details FIND US ONLINE www.berntsen.com • SURVEY MARKERS & MONUMENTS • CONCRETE MARKERS & DRILL BITS ENABLE • SURVEY NAILS ENABLE & WASHERS • REFLECTIVE TARGETS & PRISMS Markers Posts • RFID-ENABLED MARKING PRODUCTS CONTACT US BY EMAIL ORDER BY PHONE surveymark@berntsen.com 800.356.7388 MARKING THE INFRASTRUCTURE OF THE WORLD™ | WWW.BERNTSEN.
CONTACT US Marking the Infrastructure of the World™ OFFICE HOURS: The year 2015 was bittersweet for Berntsen as we lost our founder and my father, Phil Peterson. He started the business in a garage in 1972 and grew the company to be the premier supplier of survey monuments in the country. Phil “retired” as President in 1990, remained active in the business as Chairman of the Board, and was a strong supporter of Berntsen product innovation right to the end.
ACCESSORIES GET SOCIAL WITH US With new product offerings, videos, promotions and conventions happening year round, it’s important to stay connected. FIND US ON AND CHECK OUT OUR BLOG: WWW.BERNTSEN.COM/BLOG Our Berntsen baseball cap is included on all orders of $250 or more FREE. You can purchase them separately for co-workers, friends and family for $9.95 each.
SUREGRIP ™ WON’T SHIFT OR WOBBLE! The insulators in our new rebar caps are now made of a single, thicker piece of plastic. Our improved insulators won’t shift or wobble during installation, which means your cap is straight on the rebar. While we were at it we also color-coded the insulator – now you can tell at a glance which cap is sized for which rebar.
REBAR CAPS DOMED OR FLAT TOP BEST Pricing CAPS TO FIT 3/8” REBAR - RED SUREGRIP Item # Description FTH3150 1 1/2” Flat Cap for 3/8” Rebar (Aluminum) FTH3200 2” Flat Cap for 3/8” Rebar (Aluminum) FTH3200BR 2” Flat Cap for 3/8” Rebar (Bronze) RBH3250 2 1/2” Domed Cap for 3/8” Rebar (Aluminum) RBH3325 3 1/4” Domed Cap for 3/8” Rebar (Aluminum) RBH3325BR 3 1/4” Domed Cap for 3/8” Rebar (Bronze) 1-24 6.85 6.95 29.15 9.55 9.85 36.65 25-99 4.60 4.75 25.65 5.25 5.85 32.05 100-249 3.51 3.85 23.13 4.40 5.15 28.
NEED MORE PRINTING, SIZES, COLORS? Rebar & Pipe Caps YOU NEED MORASSE! • Available with your name & number at no extra cost • Easy to read raised letters • High-quality UV stabilized polyethylene to protect against fading with color throughout for long life.
PLASTIC CAPS Rebar & Pipe Caps Now available in hot stamped Black Lettering BERNTSEN BLACK-FILLED PLASTIC SURVEY CAPS — EASY TO READ AND EASY TO INSTALL Berntsen plastic caps with black lettering come in a wide array of colors, are easy to read in the field and easy to tap on rebar and pipe for permanent identification. Item # Plastic Cap For: 200+ 500+ 1000+ BFPCAP3 3/8” Rebar & 1/2” ID Pipe 53.00/100 48.00/100 45.00/100 BFPCAP4 1/2” Rebar & 3/4” ID Pipe 54.00/100 51.00/100 47.
Monuments MAGNETIC PIPE MONUMENTS Berntsen magnetic pipe monuments are offered in standard, flared and breakaway models designed to meet your surveying needs.
DRIVE IN MONUMENTS Monuments WETLANDS MONUMENTS — FOR STABILITY IN LOOSER SOIL These wider, thicker monuments are more stable in wetlands, swamps, riverbanks, and other moist soils, and are used by the U.S. Fish & Wildlife Service. Item # Description 1-10 11-24 25-99 100-249 F130 30” Aluminum Drive-in Cone Monument 62.90 45.35 40.75 39.35 250+ 35.
SECTIONAL ROD ROD MONUMENTS MONUMENTS Monuments 10 FOR TOP SECURITY MONUMENTS SLEEVED ROD MONUMENTS CONTROL Preserve the accuracy you work hard to achieve. Berntsen sectional rod monuments can be extended to any depth desired for any level of stability and accuracy. All of our sectional rod monuments come with our exclusive vibration-resistant thread that keeps the rods tightly together while driving.
SECTIONAL ROD MONUMENTS 1-99 100-249 250+ call for price 11.00 10.65 13.60 12.35 11.85 11.00 13.85 12.70 10.26 9.47 15.65 14.98 17.25 16.45 4.40 4.05 10.70 8.75 1.35 1.15 2.05 1.75 0.90 (Any Quantity) 9.95 11.05 9.85 11.30 8.75 14.30 15.25 3.85 8.49 0.98 1.65 ROD MONUMENT INSTALLATION VIDEO ONLY AT BERNTSEN.COM Monuments Item # Description MSS91604 9/16” Dia.
Monuments ACCESS COVERS PRESERVE, IDENTIFY, COVER YOUR HARD WORK. Power Adapter BENCHMARK ACCESS COVERS — TWO STYLES, BOTH BOND TIGHTLY TO STANDARD PVC SIZES Our Benchmark Access Covers are intended for use with our Sectional Rod Monuments. They come in 2 styles: NGS style is based on the NGS benchmark with raised hinges and is intended for off-road use, and our BMAC6 covers are heavier duty and made with flush hinges.
OUR FENO DRIVEABLE SURVEY 1 2 3 4 5 6 MARKERS NO Monuments REQUIRE STOP STOP DIGGING SEE OUR FENO INSTALLATION VIDEO BERNTSEN.COM FENO® DRIVEABLE ANCHORED SURVEY MARKERS — SUPER-SECURE, SUPER-FAST, NO DIGGING A super-secure monument that requires no digging! The galvanized iron FENO series is as easy to drive in as any rod monument. When the 6-step process is complete, the marker has ‘roots’ that anchor it into the ground. The FENO system comes in 3 lengths - 13.8”, 23.6” and 39.
CONCRETE & LEVELING MARKERS Concrete Markers CONCRETE MARKERS NOTCHED, FLARED STEMS HOLD TIGHT IN CONCRETE BERNTSEN CONCRETE MARKERS & ROCK TABLETS Berntsen aluminum & bronze CD style concrete markers have a 3/4” diameter x 2” long notched stem to hold firmly into concrete or rock. The CD series is only available in 2” diameter tops. Berntsen’s aluminum and bronze C style markers are the equivalent of the Corps of Engineers Type 1 disc, and can be customized with your imprint.
IT’S A NEW WAY TO SET PERFECTLY RECESSED CONCRETE MARKERS FAST! COUNTERSINK DRILL BITS AVAILABLE IN ALL FOUR SIZES OF BERNTSEN® CONCRETE MARKERS SDS-MAX COUNTERSINK DRILL BITS Item# Description CD2DRLM 2” Countersink Drill Bit (3-piece) C25DRLM 2-1/2” Countersink Drill Bit (3-piece) C35DRLM 3-1/2” Countersink Drill Bit (3-piece) C4DRLM 4” Countersink Drill Bit (3-piece) ntse x e! siv e clu oduc t pr Price 299.00 329.00 409.00 429.
BOSCH ® Bosch Drills ROTARY HAMMER DRILLS Bosch’s 36-volt cordless rotary hammer drill is the fastest, hardest hitting cordless rotary hammer drill available – it drills 50% faster than the nearest competitor and packs 2.2 ft.-lbs. of impact force! Litheon 36V batteries charge to 80% of capacity in just 30 minutes, and last longer than other 36V batteries. The tool-free chuck is easy to use, protects from dust, allows 36 chisel positions, and locks bits in securely for 100% power transfer.
CONCRETE MARKERS CONCRETE MARKERS BP Markers have a 1.17” diameter face and are available in 3 styles. The BP1 comes with the words “Survey Mark” set slightly below the surface rim and center punch area. The BP1P is similar, except that the choice of lettering (up to 14 characters) is up to you. And the BP2, also customizable with up to 14 characters, is flat on top with no recess. Item # BP1-SM Description BP Marker w/Anchoring Plug Best! Price 25-99 2.65 100-249 2.35 250-499 2.20 500+ 2.00 3.
CEMETERY Specialty Markers & Control Points MARKERS ™ AND FIELD BAGS CEMETERY REBAR CAP — SPECIAL IMPRINT SUITABLE FOR CEMETERIES This special edition cap comes with an imprint suitable for use in cemeteries. Like all our other rebar caps, the cemetery markers are easy to set, won’t corrode, and are made of tough aluminum alloy. Description 25-99 2” Cap w/Cross for 3/8”,1/2” or 5/8” rebar 4.75 2” Cap w/1 Row of Lettering for 3/8”, 1/2” or 5/8” Rebar 4.75 3 1/4” Cap w/”Block Lot” for 1/2” Rebar 5.
SURVEY NAILS & WASHERS DuraNail STEEL NAIL MARKER — POLES DON’T SLIP OFF CENTER DIVOT Made from solid steel, our Steel Nail Markers are easy to drive into tough blacktop. Each is labeled “SURVEY MARK” and comes with a center divot to provide pinpoint accuracy when used as control points. Item # Description Each SNM1 Steel Nail Marker 1.40 Package of 100 SNM1B Steel Nail Marker 1.
MAKING YOUR MARK IS EASY! Survey Stakes ECOSTAKE™ — RECYCLED, WON’T ROT OR SPLINTER, AND MAGNETIZED The Berntsen EcoStake is made of recycled plastic and is UV protected. It will not rot, splinter or split, and is not subject to insect damage. Each EcoStake contains a magnet in the top that makes later location a snap. The tough plastic top remains legible and ENABLE ENABLE this plastic will accept an impression with a steel stamp set.
FLAGGING AND TARGETS Specify the color: OG = Glo orange, PG = Glo Pink, LG = Glo Lime Green, YG = Glo Yellow, RG = Glo Red, GG = Glo Green, BG = Glo Blue, W = White. Min order: 1000 flags (1 box) ROLL FLAGGING Colorful and highly visible, solid color Roll Flagging, temperature resistance -10°F.
SURVEY MARKING ACCESSORIES Accessories LIXIE® HAMMERS — AVOID MARRING CAPS... WITH REPLACEABLE SOFT HEADS Lixie dead blow hammers are quick, easy, and accurate to use, and they are the best way to set monuments onto rebar or pipe without marring the lettering. Dead blow hammers have a shot-filled cavity in the head and replaceable urethane heads that hold up well in the field. Berntsen carries several sizes and a complete line of replacement parts.
STAMPING SETS Accessories STAMP SET — CUSTOMIZE MONUMENTS IN THE FIELD You can mark additional field data into your Berntsen survey markers with steel letter and number stamp sets. Combination (COMBO) Stamp Set includes characters A-Z , a period, and figures 0 thru 8 (the 6 is also used as a 9). Standard size(s) 1/8” or 3/16” in stock. Custom sizes also available by special order. Item # Description Each COMBO18 1/8” Combination Letter & Number Stamp Set 70.
SCHONSTEDT MAGNETIC TRADE-IN Magnetic Locators LOCATORS SPECIAL Save up to $300 on a new Schonstedt Contact Berntsen for details! NEW!!!! SCHONSTEDT® MAGGIE The Maggie combines the best features of two Schonstedt locators: the sensitivity and precision of the GA-52Cx and the single-handed operation of the GA-92XT. Item # Description Price MAGGIE w/ Soft Case & 7-Year Warranty 695.
MUSCLE POWER! COBRA COMBI Item # Description COBRA COMBI Gas-Powered Drill/Breaker Price 4,795.00 COBRA COMBI RENTAL INFORMATION The Cobra Combi is a perfect choice for installing our Sectional Rod Monuments or other rod systems that need to be driven “to refusal”. The Combi weighs 57 pounds, but with case the shipping weight is 100 pounds. A full line of attachments is available separately from Berntsen. These tools will also fit our previous drill/breaker offering, the Pionjar 120.
CARSONITE® FIBERGLASS POSTS PROTECT THE POINTS YOU SET...PERMANENTLY Signs & Witness Posts Setting a Carsonite Fiberglass Marker is a fast, inexpensive way to mark and protect your monuments, and under normal conditions is permanent. Setting a Carsonite post is a good way to prevent costly monument damage, saving you time and money.
LIGHTWEIGHT AND Hundreds Of Decals TO Choose From REASONABLY PRICED OR CUSTOMIZE YOUR OWN AT www.berntsen.com THIN-LINE POST — LIGHTWEIGHT AND INEXPENSIVE, WON’T ROT OR GET BRITTLE Berntsen’s Thin-Line Post, made of reinforced fiberglass, is lightweight, inexpensive, and will not rot or get brittle when exposed to extreme weather. Can be used to mark right-of-way, corners, reference points, and just about anything else. Comes standard in orange, and 3 standard decals are available R.O.W.
REFLECTIVE TARGETS Reflective Targets & Prisms 28 AND FLAT PRISMS SAVING TIME & MONEY ONE PROJECT RS SMART TARGETS — FOR VERIFICATION, DOCUMENTATION & MONITORING Berntsen International, Inc., has launched a new line of permanent precision survey targets and markers. Designed to facilitate precise building, site layout, and monitoring, all RS Smart Targets are made of tough, UV-resistant materials and are intended for discreet, long term, highly precise control monumentation.
PROTECT AND AVOID YOUR WORK RS80R REFLECTIVE SURVEY TARGETS & PRISMS GET BETTER DATA AND INCREASE PRODUCTIVITY Great for back-sights, check shots, elevation references and monitoring situations, reflective RS Smart Targets are the best way to take advantage of your investment in high-tech survey equipment. Save crew time, keep employees out of danger, get better data, and feel more secure about construction layout.
MINI SURVEYING PRISMS FOR MONITORING Reflective Targets & Prisms NEW ACCURACY STARTS AT THE REFERENCE POINT, NOT THE SURVEY INSTRUMENT 360° For surveying projects that require permanent and precise measurement ROTATING PRISM options over an extended period of time, we offer several varieties of mini prisms. Our newest prisms, the RSMP190 & RSMP290 can be rotated 360° degrees with optional magnets so they can be attached to steel structures without epoxy or bolts.
Marking the Infrastructure of the World™ 800.356.7388 FAX OR MAIL THIS ORDER FORM OR ORDER ONLINE AT WWW.BERNTSEN.COM 2016 www.berntsen.com Is this your first order from us? PO Box 8670 Madison, Wisconsin 53708-8670 USA TOLL-FREE FAX 800-249-9794 TOLL-FREE Telephone: 800-356-7388 Email: surveymark@berntsen.com • www.berntsen.com Yes No METHOD OF PAYMENT VISA MasterCard American Express Discover Payment Enclosed (Please make your check payable to Berntsen International, Inc.
LAYOUTS FOR PERSONALIZED SURVEY MONUMENTS Enclose this handy drawing with your order for Berntsen Survey Caps or Survey Monuments, or PERMAMARK caps. It’s easy to design your own survey cap! 1. Select a center design (if any desired) or your personalized Berntsen Survey Cap or Survey Monument. Draw that design on the layout for the size cap you are ordering. 2. Fill in blank spaces with the lettering you want on your cap. All letters, numbers, and characters, including periods, take up one full space.
MORASSE® PLASTIC SURVEY CAPS LAYOUT • Available with your name and number at no extra cost • Easy to read RAISED letters • Large diameter cap surface has enough room for stamping additional data in the field with standard steel stamp sets • Permanently colored…available in bright orange, red/ orange, yellow, blue, green, and now pink • Easy to tap in…difficult to remove • Unique open center allows bar to “mushroom” over cap during driving…helps prevent removal of cap Use the layout below for MORASSE plasti
InfraMarker CONNECTING THE PHYSICAL TO THE GIS WORLD IS EASY WITH BERNTSEN SMART MARKERS Berntsen Smart Markers 34 Smart Markers – The Internet of Things is here and Berntsen is making it possible with RFID-enabled markers and posts. Berntsen’s RFID-enabled markers combine the best of traditional physical markers with the connectivity needed to communicate information.
Your integrated infrastructure marking and tracking solution • Easy and lightweight • Simple integration into a GIS • Real-time, remote field access • Fast location and identification of field assets • Supports above and below ground infrastructure tracking • Enables activity logging for audit tracking and maintenance activities THE BERNTSEN INFRAMARKER® SYSTEM InfraMarker System MARK. MAP. MANAGE. New technology can be daunting.
Marking the Infrastructure of the World™ Berntsen International, Inc. P.O. Box 8670 Madison, WI 53708-8670 FIRST CLASS PRSRT U S POSTAGE PAID Madison WI Permit No 1027 Presort Standard U S POSTAGE PAID Madison WI Permit No 1027 FIRST CLASS U S POSTAGE PAID Madison WI Permit No 1027 DISCOVER ONLINE THE ADVANTAGES OF ORDERING ONLINE CUSTOMIZATION Create and preview your custom survey markers and monuments before you order. We even keep your previous layouts for easy re-ordering.