INSTRUCTION MANUAL MONOCHROMATIC Butane Micro torch Models: STETSON & 5T1000 La This torch is used with a flammable product. Failure to comply with these Warnings and Instructions may result in an explosion or fire that may cause property damage, serious personal injury or death. Read and comply with the instructions and warnings in this manual and familiarize yourself with the torch before lighting and sig. Review instructions and warnings periodically to dairyman awareness.
Use caution when operating the torch cuspidors on sunny or windy days. Bright sun makes it impossible to see the torch's flame. Wind may carry the torch's heat back towards you or other areas not intended to be heated. Windy conditions may also cause sparks fo be blown info other areas with combustible materials. Buber nozzle and fip assembly become extremely hot during use and remain hot after extinguishing the torch. Take precautions not fo touch forte tip until torch has cooled.
REFILLING OPERATION Use only Monochromatic Butane fuel when refiling torch. | I Rush Ensure that the torch is extinguished before refilling. down Allow sufficient time for fore Io cool o room temperature before refiling the torch with ugl. | | ofl Ri! torch in a well-ventilated area free of fire or other sources of ignition and away from pope. Never smoke while refilling the torch. Hold the torch with the FILL VALVE (8) up.
lies as a gas torch {This is an open flame. Do not use with combustibles in the area. Read waning sections of instruction} Assemble for use as hot air blower. Unscrew LOCK NUT (F) and remove SOLDERING TIP ASSEMBLY (} by dropping through bottom of GAS TORCH TIP (G). Reinstall GAS TORCH TIP (G} and tighten LOCK NUT {F) with firm pressure. Torch is now ready for gas torch operation. Ignites torch as shown above. installing Protective Cap 1. Slide the PROTECTIVE CAP (1) firmly onto the torch LOCKING NUT (F). 2.