Instruction Handbook

FIRESTORM WARNING

All owners and user of FIRESTORM® pistols are re-

minded to use the manual safety lever to decock

their pistols. This is the only way to safely lower the

hammer.

WARNING

The hammer should NEVER be manually lowered by

pulling the trigger. Manually lowering the hammer

is dangerous and may cause serious injury or death.

DISASSEMBLING AFTER FIRING

Hold the pistol with the shooting hand (Figure 1).

With the other hand, grasp the grooved surface at

the rear of the slide and pull it back. Press disassem-

bly piece nr. 21 and the slide will go back again to a

second stop (Figure 2). Then lift the slide and pull

(Figure 3).

CARE AND CLEANING

After disassembling, clean the barrel and cham-

ber thoroughly with solvent to clean all exposed

internal surfaces. Give special attention to the bolt

face (where the ring pin protrudes) and under the

extractor hook. Lubricate moving parts sparingly

with a light high- quality rearm lubricant. Wipe o

any excess oil.

REASSEMBLY

Put the spring around the barrel. Hold the pistol

with the shooting hand. Keep the disassembly lever

down (Figure 3), and release it.