Quick Start Guide

- CHANGING THE NOZZLES FOR USE WITH OTHER TYPES OF GAS:

To change the nozzles of the burners use the following procedure:

Lift up the burners and unscrew the nozzles ( Fig.) using an adjustable spanner of 7 mm and change the nozzles with

those designed for the new gas supply according to the information given in TABLE shown below.

Models CTYK..U7X(2, 5)A

Adapting to different types of gas

Burner Position Injector Gas Pressure Max Rate Min Rate By-pass

diam. [mm.] Type [i.w.c.] [BTU/h] [W] [BTU/h] [W] diam. [mm]

Auxiliary Front R 0,92 NG 4” 3750 1098 900 264 Regulated

0,56 LP (Propane) 11” 3750 1098 900 264 0,29

Semi-Rapid Rear L & C 1,17 NG 4” 6000 1759 1500 439 Regulated

Front C 0,73 LP (Propane) 11” 6300 1845 1500 439 0,36

Rapid Rear R 1,55 NG 4” 10400 2046 2500 732 Regulated

0,98 LP (Propane) 11” 11400 3339 2500 732 0,47

Front L Inner 0,80 NG 4” 2730 799 900 264 Regulated

Dual Burner 0,50 LP (Propane) 11” 2900 8479 900 264 0,29

Front L Outer N°2 x 1,30 NG 4” 15000 4394 4500 1319 Regulated

N°2 x 0,83 LP (Propane) 11” 16400 4804 4500 1319 0,65

CAUTION: save the orifices removed from the appliance for future use