Specifications

26
GASOVENOPERATION

THERMOCOUPLESAFETYVALVE
Bertazzoni gas ovens are equipped with a
thermocouple safety device and a thermostat to
setthepropercookingtemperature.
The thermocouple opens the flow of gas to the
burner only when hot. Should the flame go off,
the thermocouple will immediately close the gas
flow to the
burner eliminating any risk to your
home.
Forfasteractivationofthethermocouple,always
light the burners on maximum power. This will
allow the thermocouple to reach the optimum
temperatureinthefastesttime.
ATTENTION!
Whenusingtheovenforthefirsttimeitshould
beoperatedfor1530
minutesatatemperature
ofabout500 °F/260°Cwithou tcookinganything
insideinordertoeliminateanymoistureand
odoursfromtheinternalinsulation.
ELECTRICIGNITION
WARNING!
Alwayskeeptheovendooropenwhenlighting
theoven.
Donotoperateignitiondeviceformorethan15
seconds.Ifafterthat
periodtheburnerhasnot
beenlit,opentheovendoorandwait60
secondsbeforetryingtolighttheovenagain.
With the oven door partially open, turn the
control knob to the maximum temperature
setting(
position).
Press the control knob to start the gas flow and
theignitionspark.
Wait 10 seconds after the burner has been
completelylitbeforereleasingtheknob.Thiswill
allow the thermocouple to reach its operating
temperature.
The gas oven operation is indicated by a blue
lightontheleft
sideofthecontrolpanel.
Before closing the oven door, visually check that
the flame is on through the portholes on the
oven compartment bottom panel. If no flame is
visible,repeattheprocedure.
After lighting the burner and setting the desired
temperature, wait about 15 minutes before
puttingfood
intopreheattheoven.
WARNING
Iftheovenburnerflameisextinguished
accidentallyduringoperation,turnthe
temperaturecontrolknobcounterclockwiseto
theoffposition.Waitatleast60secondsbefore
attemptingtolighttheovenagain.