Specifications

9
INSTALLINGTHEBACKGUARD
The backguard must be installed prior to
operation of the appli ance for appropriate
ventilationoftheovencompartment.
Thesuppliedbackguardisa2‐partassembly.The
box also contains a set of metal screws for
securingthebackguardtotheworktop. 



Disassemblethebackguardandpositionthefront
part on the worktop. Align the screw holes with
the corresponding holes at the back of the
worktop.


If the holes are not aligned, partially loosen the
brackets att the back of the worktop as  shown
below.

Install the front part of the backguard by
tighteningthe 2central screws fromthe top and
2lateralscrewsfromthebottom.


Positionthebackpartofthebackguardand
secureittotheworktoptightening4screwsfrom
thebottom.



Connectthebackandfrontpartoftheupstand.
Checkfortightassembly.