Installation, Use and Care Manual

18
STEP2:SURFACEBURNERS
Toreplacethenozzlesofthesurfaceburners,lift
up theburners and unscrewthe nozzles shipped
withtherangeusinga7mm{sochetwrench).
Replacenozzlesusingtheconversionsetsupplied
with the range or by a Bertazzoni authorized
parts warehouse. Each nozzle has a
 number
indicating itsflow diameterprinted on thebody.
Consultthetableonpage22formatchingnozzles
toburners.








STEP3:MAINOVENBURNER
Toreplacethenozzlesofthe mainovenburner,
startbyremovingthebottompaneloftheoven.


Loosenthescrewlocatedontherightsideofthe
burnerandpullouttheburnerfromitssupport.
ATTENTION:payextraattentiontoavoiddamage
totheigniterandthermocouple.
Leftoven
