User and Care Manual

11
Y
Min. 3/4 "
X
Min.13/16 "
X
Y
Min.13/16 "
Min. 3/4 "
1a
Cut out the opening in the underside of
the cabinet as shown in Figure 1a.
Installation Instructions
1b
It is recommend that the Insert Hood is supported by a 3/4" wood base to insure Side Mount
Clip alignment.
Minimum cabinet opening height-16". However height may vary to allow for ducting.
Install the Insert Hood into the cabinet opening, and fully engage the four spring-loaded Side
Mount Clips onto the cabinet wood base.
Next from underneath the Insert as shown in Figure A, locate the screw in each of the Side
Mount Clips.
To lock the Insert Hood into position, tighten the screw for each of four Side Mount Clips.
Next from underneath the Insert Hood Place the four plastic stoppers (10) as shown in Figure B.
Model # X Y
KIN36XT 31-7/8" 17-3/8"
KIN48XT 43-11/16" 17-3/8"
Two people may be
required for installation.
2x
2x
A
B
10
Min. 24" Min. 30"