Installation Sheet

BEFORE OPERATING
Before operating your new Microwave make sure you read
and understand this Use and Care Guide completely.
The following steps MUST be taken before any functions can
be used. Before you use the over the range microwave:
1. Plug in the Microwave. WELCOME PRESS CLEAR AND PRESS
CLOCK will appear.
2. Touch the STOP/CLEAR pad.
:
will appear.
3. Set clock.
TO SET THE CLOCK
1. Touch TIMER/CLOCK pad and number 2.
2. Enter the correct time of day by touching the numbers in
sequence. Touch TIMER/CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time,
ERROR
will appear in the display. Touch the STOP/
CLEAR pad and re-enter the time.
• If the electrical power supply to your over the range
microwave should be interrupted, the display will
intermittently show WELCOME PRESS CLEAR AND PRESS CLOCK
after the power is reinstated. If this occurs during cooking,
the program will be erased. The time of day will also be
erased. Simply touch STOP/CLEAR pad and reset the
clock for the correct time of day.
STOP/CLEAR
Touch the STOP/CLEAR pad to:
• Erase if you make a mistake during programming.
• Cancel timer.
• Stop the over the range microwave temporarily during
timed cooking.
• Return the time of day to the display.
• Cancel a program during cooking, touch twice.
TIME COOKING
Your over the range microwave can be programmed for 99
minutes 99 seconds (99.99). Always enter the seconds after
the minutes, even if they are both zeros.
Cook for 5 minutes at 100%
1. Enter cooking time 500.
2. Touch START/ADD A MINUTE pad.
TO SET POWER LEVEL
There are eleven preset power levels.
Using lower power levels increases the cooking time, which is
recommended for foods such as cheese, milk and long slow
cooking of meats. Consult a microwave cookbook or recipes
for specic recommendations.
Defrost for 5 minutes at 30%
1. Enter defrost time 500.
2. Touch POWER LEVEL 8 times.
3. Touch START/ADD A MINUTE.
Touch Power Level pad num-
ber of time for desired power
Approx. % of
Power
Common words for
Power Levels
Power Level x 1 100% High
Power Level x 2 90%
Power Level x 3 80%
Power Level x 4 70% Medium High
Power Level x 5 60%
Power Level x 6 50% Medium
Power Level x 7 40%
Power Level x 8 30% Med Low/Defrost
Power Level x 9 20%
Power Level x 10 10% Low
Power Level x 11 0%
8
9
OTX_Use & Care.indd 8 2/25/11 8:15 AM