Installation And User Guide

REPLACING ACTIVATED CHARCOAL FILTER

• Remove the Filters one at a time, pushing them towards the back of the unit and at the same

time pulling downward.

• Remove the saturated charcoal lter by releasing the hooks.

• Fit the new lter and fasten it in its correct position.

• Replace, taking care to ensure that the handle faces forwards.

• "When used in recirculation mode, to Reduce the Risk of Fire and Shock use only conver-

sion kit Model # 901497.

Please contact the retailer that sold you the product to purchase carbon lters above.

REPLACING BULBS

LEDlightsmustbereplacedbyauthorizedservice.

The lter is not washable and cannot be regenerated, and must be replaced approximately

every 4 months of operation, or more frequently for particularly heavy usage.