Installation And User Guide

OPERATING THE CONTROLS

FOR BEST RESULTS

Start the Range Hood several minutes before cooking to develop proper airow.

Allow the Range Hood to operate for several minutes after cooking is complete to

clear all smoke and odors from the kitchen.

NOTE: If your product has had a CFM adjustment, refer to the CFM adjustment manual for the information.

Some motor speeds or functions may be reduced.

Button Function

T1 T2 T3 T4 L

Fan o󰀨 button:turn the blower O󰀨. The fan can be operated by pressing any of the fan

setting buttons.

Hold down this button for 2 seconds to activate Delay o󰀨 function which will keep the fan on

for 15 minutes and automatically shut o󰀨.

T1 T2 T3 T4 L

Fan settings buttons: Low speed.

T1 T2 T3 T4 L

Fan settings buttons: Medium speed.

T1 T2 T3 T4 L

Fan settings buttons: High speed / Intensive speed.

Hold down the button for 2 seconds to activate the intensive speed, which is timed to run

for 6 minutes. At the end of this time it will automatically return to the speed set before.

Suitable to deal with maximum levels of cooking fumes.

T1 T2 T3 T4 L

Light button: On/O󰀨 switch for the lights.

T1 T2 T3 T4 L

LT1 T2 T3 T4