DL 79b9cdbd51695fc6907e29efd1b6

- 5 -
INSTALLATION
The hood must be installed inside a
cabinet.
ATTENTION: 2 persons are required
for proper installation; the unit should
be installed by a qualified operator.
For the cabinet measurements, refer to
Figure 2.
Installation directly to cabinet
Refer to Figure 3.
1. Make the 4 necessary mounting holes
in the cabinet and cut the air venting
and power cord holes.
2. Move the hood close to the bottom of
the cabinet and then secure the unit
by means of the 4 self-tapping screws
(4.2 x 32 mm) supplied.
FIGURE 3
MOUNTING SCREWS
(4.2 x 32 mm)
9-3/16”
B
B
18-3-16” = (version 23-5/8”)
24-9/16” = (version 30”)
10-11/16”
11”
23-5/8”
30”
9-5/8”
7-1/16”
FIGURE 2