DL 79b9cdbd51695fc6907e29efd1b6

- 6 -
FIGURE 4
WIRING
Note: This range hood must be properly grounded. The unit should be installed
by a qualified electrician in accordance with all applicable national and local
electrical codes.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the
electric current. This appliance is equipped with a cord having a grounding wire
with a grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded.
WARNING - Improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding instructions are not completely
understood, or if doubt exists as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified
electrician install an outlet near the appliance.
Position the electrical outlet at a maximum distance of 35-7/16” (90 cm) from
where the lead exits from the hood (see fig.4).
Fit the plug into the outlet.
MAX
35-7/16”
(90 cm)
It is also recommended that the cupboard has a door or service panel that can be
easily opened to access the outlet.