DL 79b9cdbd51695fc6907e29efd1b6

- 7 -
CONNECT DUCTWORK
(DUCTED HOODS ONLY)
1. Install the discharge collar into the
duct connector of the range hood.
Fig.5
2. Use 6" round metal duct to connect
the discharge collar on the hood to
the ductwork above. See Fig. 6
3. Use duct tape to make all joints
secure and air tight.
4. Insert the unit plug into the power
outlet.
FIGURE 5
DISCHARGE
COLLAR
DUCT
CONNECTOR
NON-DUCTED
RECIRCULATION FILTER
INSTALLATION
(NON-DUCTED HOODS ONLY)
1. Install the discharge collar into the
duct connector of the range hood.
Fig.5
2. Refer to Figure 6B. Connect a 6”
round metal duct to the discharge
opening so that the air is sent outside
the cabinet and sent back into the
room.
3. Position the filters over the blower.
4. Rotate to lock filters in place (Fig. 7).
5. Purchase replacement filter packs
(contains 2) from your dealer.
FIGURE 7
FIGURE 6
Ø 6”
ROUND
METAL
DUCT
FIGURE 6B
Ø 6”
ROUND METAL
DUCT
(MIN HEIGHT
15”)
CHARCOAL
FILTERS
DUCTED HOODS
NON-DUCTED HOODS