CHIMNEY HOOD INSTALLATIONS INSTRUCTIONS MODELS KU90 PRO 2X KU122 PRO 2X 310792
Fig. 1 fig.3 Fig.
fig.
CHIMNEY HOOD INSTALLATIONS INSTRUCTIONS Important safeguards Do not connect the exhaust hood to chimneys, flues and airducts serving the room. The evacuated air must not be let into a warm air duct. The exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels. There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels.
4) 5) Hook or attach the hood to the bracket using the screws supplied and check carefully that it has been done properly. A few hoods may be supplied with specific screws for their horizontal or vertical adjustment (pict. 4/N). In order to provide an exact installation the cooker hood (in the rear of the body) is supplied with two holes of 8 mm (5/16) diameter (pict. 4/S), where the two screws with plugs have to be inserted (pict. 4/Q).
Safety rules CAUTION: Accessible parts may become hot when used with cooking appliances. WARNING: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. WARNING: Children should be supervised to ensure that they do not play with the appliance.
5. Based on "Kitchen Firesafety Tips" . 7) WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLOWING: A. lnstallation Work And Electrical Wiring Must Be Done By Qualified Person(s) In Accordance With All Applicable Codes And Standards, Including Fire-Rated Construction. B. Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent backdrafting.
