DL 3441afbde3e94967ba26e87c1160

16
OVEN COOKING
WARNING Use Care When Opening Door. Let hot air or steam escape before removing
or replacing food.
Do Not Heat Unopened Food Containers. Build-up of pressure may cause
container to burst and result in injury.
Keep Oven Vent Ducts unobstructed.
Placement of Oven Racks. Always place oven racks in desired location while
oven is cool. If rack must be moved while oven is hot, do not let potholder
contact hot heating element in oven.
Do Not Clean Door Gasket. The door gasket is essential for a good seal. Care
should be taken not to rub, damage, or move the gasket
Do Not Use Oven Cleaners. No commercial oven cleaner or oven liner
protective coating of any kind should be used in or around any part of the
oven.
Clean Only Parts Listed in manual.
Before Self-Cleaning the Oven. Remove broiler pan and other utensils.
CAUTION Do not store items of interest to children in cabinets above a range or on the back
guard of a range – children climbing on the range to reach items could be seriously
injured.
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACE OF OVEN
Heating elements may be hot even though are dark in colour. Interior surfaces of an
oven become hot enough to cause burns. During and after use, do not touch, or let
clothing or other flammable materials come into contact with the heating elements
or interior surfaces of oven until they have had sufficient time to cool. Other surfaces
of the appliance may become hot enough to cause burns, for example, oven vent
openings and surfaces near these openings, oven doors, oven glass window.
USING THE LCD DISPLAY
At power on, the contact is opened. The display and AUTO symbol flashes and
time of day starts from 0:00. Power on state with flashing daytime remains until
time of day is set
SETTING TIME Press PLUS (+) and MINUS (-) button simultaneously. At Power On, also MODE
button is possible. Time of day can be set with PLUS or MINUS, while the colon
between hours and minutes is flashing. When PLUS or MINUS is continually hold,
the quick setting mode starts. If daytime setting mode is selected while an
automatic program is active, the automatic program is cancelled.
When the symbol is present the manual mode is activated, the oven can
operate only using the functions and temperature knobs
MANUAL MODE Once the cooking program is finished, to restore the manual mode, press M key for
2 seconds, the symbol appear. The oven can operate only using the functions
and temperature knobs.
TIMER
The purpose of the timer is just of a sound signal, which can be set for a max time of
23h59min. once elapsed the set time, the symbol turns off and a sound signal is
heard; this sound set off automatically in 7min, or you can stop it by pressing any key
of the programmer. To set the timer press the M key for 2 seconds, or anyway just to
see the symbol blinking. Set the timer by using the + or - keys. Release the + or -
key when you have matched your desired time. In a few seconds the current time
appears on the display together with the symbol. The countdown starts immediately
from now on.
SEMI-AUTOMATIC COOKING
Cooking time: Once having selected a cooking function and set the desired
temperature, press the M key for a 2 seconds time to access the programming mode.
The symbol appears. Release and press again the M key. On the display, the
AUTO symbol starts blinking and the " dur " writing appears on the display, then it