Specification Sheet

WWW.BERTAZZONI.COM
Bertazzoni recommends to operate the appliance after it has been
installed in a cabinet. The kitchen cabinets shall be made of materials
capable of withstanding temperatures at least 117°F (65°C) above
room temperature in order to avoid possible damage to the cabinets
during oven usage. The appliance must be installed into cabinetry
and be supported from underneath. The air intake opening at the
bottom of the door must be left unobstructed. For a flush mount
installation the surrounding cabinets doors should have the same
thickness as the oven control panel. For installation of the oven in
For any combinations of built-in models, please see related installation drawings
INSTALLATION INSTRUCTIONS
MASFS30XV
Air intake opening clearance
Cut out for power cord
22
1"
3"
1
⁄4
5
⁄8"
7
⁄16"
28"
1
⁄4
28"
1
⁄2
23"
16"
16"
4"
4"
28"
1
⁄8
28"
1
⁄16
1"
29"
3
⁄4
22"
5
⁄8
21"
5
⁄8
28"
3
⁄4
4"
3
⁄4
23"
1
⁄4
22
1"
3"
1
⁄4
5
⁄8"
7
⁄16"
28"
1
⁄4
28"
1
⁄2
23"
16"
16"
4"
4"
28"
1
⁄8
28"
1
⁄16
1"
29"
3
⁄4
22"
5
⁄8
21"
5
⁄8
28"
3
⁄4
4"
3
⁄4
23"
1
⁄4
The minimum gap between the kichen cabinet upper or lower panel and the ap-
pliance is 1/8. This dimension must be added to the height listed in the drawings
Disclaimer: while every effort has been made to insure the accuracy of the information contained in
this brochure, Fratelli Bertazzoni reserves the right to change any part of the information at any time
without notice.
Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of
Bertazzoni Spa.
column please refer to the drawings view of model MO 30 STANE.
For under counter installation refer to the cooktop or rangetop
installation drawing in the specific sections of this document.
79