Spec Sheet

MAST30WDEX
MASTER SERIES
30" WARMING DRAWER
PRODUCT DIMENSIONS
INSTALLATION
REQUIREMENTS
See BERTAZZONI DESIGN GUIDE
SIDE VIEW FRONT VIEW TOP VIEW
ELECTRICAL CONNECTION INSTALLATION OPTIONS
This product is designed to be installed
in combination with other Bertazzoni
ovens.
No support shelf needed in case an
oven is installed above the drawer.
See several installation options shown
in the BERTAZZONI DESIGN GUIDE.
For single ovens installed into a wall
cabinet, the electrical junction box may
be located above, below to the left or
right of the unit within reach of the
power cord.
Placement within the opening may
require additional cabinet depth.
FRONT VIEW
SIDE VIEW FRONT VIEW
TOP VIEW
1"
26
29 7/8"
758
19 1/8"
487
21 1/2"
547
5/8"
15
9 7/8"
251
28 1/8"
713
21"
532
POWER CORD
OUTPUT
E
E
5"
127
4"
102
3 3/8"
86
9 5/8"
246
22"
558
28 1/2"
724
30 1/2"
774
FLUSH INSET
WIDTH
3/4"
19
10 1/8"
256
1"
25
1"
25
23 3/4"
604
FLUSH INSET
DEPTH
For installation of multiple products in combination, refer to the Design Guide at us.bertazzoni.com or ca.bertazzoni.com
Disclaimer: while every effort has been made to ensure the accuracy of the information contained in this document, Fratelli Bertazzoni reserves the right to change it at any time without notice.
For detailed installation instructions, consult the installation manual. Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of Bertazzoni Spa.
bertazzoni.comversion: 3