Installation Instructions

TOOLS YOU WILL NEED:
 Phillips head screwdriver
 5/16" and 1/4" nutdriver
 6" Adjustable wrench
 Level
 Carpenters square
 Measuring tape
 Safety glasses
 Flashlight
 Bucket to catch water when fl ushing the line
 Gloves
For New Installations Only:
 Tubing cutter
 Drill and appropriate bits
 Hole saw set
Phillips
Head
Screwdriver
Installation Preparation
PARTS SUPPLIED:
 Four flat head wood screws
dishwasher to underside of countertop
(in literature package).
MATERIALS YOU WILL NEED :
 Ferrule, compression nut and 90° Elbow (3/8"NPT external
thread on one end, opposite end sized to fi t water supply)
 Thread seal tape
 UL Listed wire nuts (3)
Materials For New Installations Only:
 Air gap for drain hose, if required
 Waste tee for house plumbing, if applicable
 Electrical cable or power cord, if applicable
 Screw type hose clamps
 Strain relief for electrical connection.
 Hand shut-off valve
 Water line 3/8" min. copper
 Coupler for extending drain line, if applicable
90° Elbow,
Ferrule and
Compression Nut
Wire Nuts (3)
Waste Tee
Electrical Cable
(or Power Cord, if applicable)
Hot Water line
Screw Type
Hose Clamps
Coupler
Hand
Shut-Off
Valve
Hole Saw Set
Measuring Tape
Tubing Cutter
Drill and Bits
1/4"
and 5/16" Nut-
driver
Safety Glasses
6" Adjustable
Wrench
Bucket
Flashlight
Gloves
Carpenters
Square
Level
2
Thread
Seal Tape
Air Gap
Strain Relief
2 Side
Mounting Clips
2 Top
Mounting Clips
Screw Type
Hose Clamp

Screw type hose clamps and one drain hose.
Drain Hose
to secure
4 Wood Screws

2 side mounting clips.

2 top mounting cl ips.