Specification Sheet

MD24X
24" MICROWAVE DRAWER
PRODUCT DIMENSIONS
INSTALLATION
REQUIREMENTS
Minimum suggested load on cabinet
base board is 100 lb (45 kg)
SIDE VIEW
SIDE VIEW FRONT VIEW
TOP VIEW
FRONT VIEW TOP VIEW
ELECTRICAL CONNECTION CUTOUT DIMENSIONS
For single ovens installed into a wall
cabinet, the electrical junction box may
be located above, below to the left or
right of the unit within reach of the
power cord.
Placement within the opening may
require additional cabinet depth.
FRONT VIEW
(a) Visible Area
–
Match finish to outside cabinet panels
POWERCORD
OUTPUT
36"
914
1 1/8"
28
22 1/8"
562
23 7/8"
608
FLUSH INSET
WIDTH
15 1/2"
395
15 7/8"
404
FLUSH INSET
HEIGHT
23 1/2"
597
FLUSH INSET
DEPTH
1 1/8"
28
1/8"
4
7/8"
23
7/8"
23
1/4"
6
1 1/8"
29
23 7/8"
606
15 7/8"
403
21 7/8"
555
21 5/8"
550
14 5/8"
370
4 5/8"
119
4"
102
16 1/8"
410
E
4"
102
5"
127
POWERCORD
OUTPUT
ANTI-TIP BLOCK
a
a
1 1/8"
29
23"
584
For installation of multiple products in combination, refer to the Design Guide at us.bertazzoni.com or ca.bertazzoni.com
Disclaimer: while every effort has been made to ensure the accuracy of the information contained in this document, Fratelli Bertazzoni reserves the right to change it at any time without notice.
For detailed installation instructions, consult the installation manual. Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of Bertazzoni Spa.
bertazzoni.comversion: 2