DL 7365f9f57022a02836187730ddea

5
Attaching the hotplate
To prevent liquids from leaking accidentally into the underlying storage space, the appliance is equipped with
a special gasket. To apply this gasket, carefully follow the instructions in Fig. 7. Lay out the protective sealing
strips along the edges of the opening in the bench top and carefully overlap the strip end. (See Fig. 7). insert
the hotplate into the bench top opening. With a screwdriver assemble the brackets to the hotplate bottom by
means of the screws . (See Fig. 8-9). Slide the hooks into position and secure them with the screws.
Trim the part of the sealing strips which extend beyond the hotplate base
Electrical connection
The appliance is equipped with a 4 ft. (1.2 m.) flexible metal cable(fig.10-11-12) with 3 wires ready for
connection to a dedicated 3 wire grounded power supply/junction box: (fig.13)
Voltage 208 V a.c., Frequency 60Hz. Max Current: 8300W /40 A
Voltage 240 V a.c., Frequency 60Hz. Max Current: 11000W /45,8 A
Black wire
: connect to L1 (hot)
Red wire
: connect to L2 (hot)
Green wire
: connect to GND (ground)
A dedicated line and junction box should be used to connect the oven to a 50 A circuit.
Wiring diagrams Fig. 19.
Descriptions
DESCRIPTIVE CAPTION FOR HOB (fig.15-16-17)
1. Central Induction element
2 Rear Induction element
3. Front induction element
4. Central Induction element control knob
5. Rear Induction element control knob
6. Front Induction element control knob
Service & maintenance instructions
Service and maintenance only to be carried out by an authorised person
To replace parts and electric components, the hotplate must be removed from the bench top by releasing the
attachment hooks, loosening the attachment screws of each burner, unscrewing the hotplate attachments
nuts which are visible at the bottom of the surface, removing the hotplate top and finally replacing the
defective parts.
WARNING: Disconnect power before servicing unit.
For the location of the wall receptable for the connection of the three-pin earthed plug of the
appliance, see indications given in Fig. 1
User instructions
IMPORTANT SAFETY INSTRUCTIONS
1 - Proper Installation - Be sure your appliance is properly grounded and installed by a qualified technician.
2 - Never Use your Appliance for Warming or Heating the Room.
3 - Do Not Leave Children Alone - Children should not be left alone or unattended in an area where
appliance is in use. They should never be allowed to sit or stand on any part of the appliance.
4 - Wear Proper Apparel - Loose-fitting or hanging garments should never be worn while using the
appliance.