Installation, Use and Care Manual

12
INSTALLINGTHEBACKGUARD
The back guard must be installed prior to
operation of the appliance for appropriate
ventilationoftheovencompartment.
Thesuppliedbackguardis a2‐partassembly.The
box also contains a set of metal screws for
securingthebackguardtotheworktop.



Disassemble the back guard and position the
frontpart on theworktop. Alignthe screw holes
with the corresponding holes at the back of the
worktop.


If the holes are not aligned, partially loosen the
brackets at the back of the worktop as shown
below.



Installthefrontpartofthebackguardby
tighteningthe2centralscrewsfromthetopand
2lateralscrewsfromthebottom.
