Installation, Use and Care Manual

16
4) Loosestrainreliefbyunscrewingthetwo
strainrelief'sscrewsasindiagram.










5) Remove dama ged supply cord set by taking
off the 4 electrical connection screws (block
L1,N,L2andGroundscrew,seediagram)
6) Insert the new supply cord set in the strain
relief and lock it with two strain relief's
screwsinsuitableposition.
7) Fixwell the ring
terminals G,L1,N, L2ofthe
new supply cord set asshown in diagram
withits4screws
8) Re‐install the back enclosure panel  with 6
screws
9) Slide the appliance back into its proper
location
10) Re‐connect the appliance to the electrical
power.

ELECTRICALGROUNDING
Thisapplianceisequippedwithafour‐prongplug
for your protection against shock hazard and
should be plugged dir ectly into a properly
grounded recepta cle. Do not cut or remove the
groundingprongfromthisplug.
