DL 0306fed8007f61dca20acd03c94f

Basic settings

Initial Settings

After your steam oven is first plugged in or after a

power failure, the clock display will flash to

indicate that the time shown is not correct.

The oven will not operate until the clock and the

water hardness parameter is set.

To set the clock and the water hardness

parameter value proceed as described in the

following chapters:

Setting the clock

Before using the oven, adjust the clock through the procedure described below but starting on Step 3.

To set the clock, proceed as follows:

1. Press the “+” key until the Clock Indicator

Light starts to flash.

2. Press the OK key.

3. Press the “+” and “-“ keys to set the correct

hour value.

4. Press the OK key to validate the hour value.

The minute numbers will start to flash.

5. Press the “+” and “-“ keys to set the correct

minute value.

6. To finish, press the OK key again.

Hiding / Displaying the Clock

If the clock display disturbs you, you can hide it by proceeding as follows:

1. To block, the oven press the “+” key and the

“-“ key simultaneously for 5 seconds. The

dots that separate the hours and minutes

and the clock symbol will flash, but the rest

of the clock display will be hidden.

2. If you want to see the clock display again,

press the “+” and “-“ keys again for 5

seconds.

2,4,6

1, 3, 5

5 sec.