PRO CS30 X specifications sheet 0

Disclaimer: while every effort has been made to insure the accuracy of the information contained in
this brochure, Fratelli Bertazzoni reserves the right to change any part of the information at any time
without notice.
Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of
Bertazzoni Spa.
WWW.BERTAZZONI.COM
18"
1
⁄4
23"
3"
15
⁄16
21"
21
⁄32
17"
19
⁄32
18"
5
⁄8
4"
3
⁄4
13"
25
⁄32
1"
29"
3
⁄4 21"
17
⁄64
28"
1
⁄2
23"
5
⁄8
Bertazzoni recommends to operate the appliance after it has been
installed in a cabinet. The kitchen cabinets shall be made of materials
capable of withstanding temperatures at least 117°F (65°C) above
room temperature in order to avoid possible damage to the cabinets
during oven usage. For further installation instructions refer to the
installation manual.
For any combinations of built-in models, please see related installation drawings
INSTALLATION INSTRUCTIONS
PRO CS30 X
The minimum gap between the kichen cabinet upper or lower panel and the ap-
pliance is 1/8. This dimension must be added to the height listed in the drawings