Installation, Use & Care Manual

11
/ Clearence dimensions
HOB FASTENING
In order to prevent accidental water ingress into
the unit below, the appliance is tted with a special
gasket.
1)Lay out the protective sealing strips along
the edges of the opening in the bench top and
carefully overlap the strip end.
2)Insert the hotplate into the bench top opening.
3) With a screwdriver assemble the brackets A to
the hotplate bottom by means of the screws.
4) Slide the hooks into position and secure them
with the screws.
5)Trim the part of the sealing strips which extend
beyond the hotplate base