Spec Sheet

REF18FCIPIXL
18" BUILT-IN FREEZER COLUMN
STAINLESS STEEL LEFT SWING DOOR
PRODUCT DIMENSIONS
(a) Area to be left clear for the anti-tipping brackets
–
3”1/2x5” (82x127mm)
SIDE VIEW FRONT VIEW TOP VIEW
CUTOUT DIMENSIONS
* Maximum Overall Handle Dimension
INSTALLATION
REQUIREMENTS
If the appliance(s) is not connected
through the side profile trims to
secured cabinetry anti-tip brackets
must be installed.
SIDE VIEW FRONT VIEW
TOP VIEW
ELECTRICAL & WATER
CONNECTION
Connection(s) placement within the
opening may require additional
cabinet depth.
TOP VIEW
E
W
FRONT VIEW
EWEW
WE
EWEW WE
5"
127
A
properly-grounded,
horizontally-mounted electrical
receptacle should be installed
according to this drawing.
To connect to the water supply
system, a 3/4” NPT waterline
with accessible shut-off valve
must be supplied.
17 15/16"
456
83 1/2"
2120
+
1"(25)
22 1/4"
565
19 7/8"
505
18"
457
83 7/8"
2130
Min.
25"
635
a
a
80 3/4"
2050
+
1"(25)
2 3/4"
70
24 3/8"
620
5 3/4"
146
+ 1"(25)
77 3/4"
1974
5"
127
17 5/8"
447
DOOR
WIDTH
40 3/4"
1034
2 1/2"
63
*
100°
For installation of multiple products in combination, refer to the Built-in Food Preservation Design Guide at us.bertazzoni.com or ca.bertazzoni.com
Disclaimer: while every effort has been made to ensure the accuracy of the information contained in this document, Fratelli Bertazzoni reserves the right to change it at any time without notice.
For detailed installation instructions, consult the installation manual. Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of Bertazzoni Spa.
bertazzoni.comversion: 2