Installation Guide

> Access the back of the appliances to mount the

joining brackets: ﬁx one side of the top and lower

brackets to one of the appliances and subsequently

to the other [ 2 ].

IMPORTANT: the appliances must be level with

one another.

1 – Attach both units to each other at the front us-

ing the 5 white plastic brackets to hold the units

together.

2 – Adjust the units in the back, so that the side pan-

els are perfectly parallel to each other. There are

visual cues that will aid with alignment.

3 – The gap ( C ) between the units must be the

same at the back and top. Measure the gap on all

edges and adjust if not equal.

4 – Once the gap is consistent on all edges, secure

the brackets. If the gap between the units is not

even, doors will not align properly.

Gap measurements vary according to the types

of units installed. Please refer to the table be-

low for correct gap measurements.