Installation & Assembly

WARNINGS:

STEP 1: Detach the front panel (D) from side panels (B & C) with Allen key (2).

STEP 2: If mattress support (F) is not in the lowest position, unscrew bolts (4) and

spring washers (6) from left & right side panels (B & C) and move

STEP 3: Attach front rail (E) to the side panels (B & C) with wood dowels (1), bolts (7)

and spring washers (5). Use Allen key (2) to tighten all bolts.

STEP 4: Ensure all bolts are tightly secured.

STEP 1: Follow steps 2 and 3 of the crib assembly instruction. (Omitting the front panel (D))

STEP 2: Follow steps 2 to 4 of the day bed assembly instruction located above (starting

from crib).

Lafayette 4-in-1 Crib

BR1510B4

DAY BED ASSEMBLY: STARTING FROM CRIB

DAY BED ASSEMBLY: STARTING FROM SCRATCH

to the lowest position.

ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8

INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).

The toddler bed or day bed is not intended for children under 15 months of age or over 50

lbs (22.7 kgs).