Operation Manual

INSTALLING THE CAR SEAT

group II /15-25 kg/

This installation method is for child within Group ІI (15 – 25 kg).

1. Remove the harness system first, including thee belt pads, buckle and crotch strap..

2. Install the shoulder and lap belt by threading the vehicle’s lap and shoulder belt through the hook

(Fig.6-А) on the top of shell and over the belt guider. (Fig.6-7)

Fig.6 Fig.7

Fig.6-A

PLACING YOUR CHILD

IN THE CAR SEAT

1. Loosen the shoulder belts by pressing the push button and pull the shoulder belts towards you.

Important: Do not pull on the belt pads when doing so. (Fig.8-9)

2. Press the red button to open the buckle. (Fig.10)

3. Part the belts over the sides of the shell. (Fig.11)

4. Position your child into the shell and make sure that there are no toys or other hard objects in the

shell. (Fig.12)

5. Match buckle tongue sections together and insert them into the buckle. (Fig.13)

6. Make sure the shoulder belts fit your child snugly by pulling the adjuster belt. (Fig.14)

Fig.8 Fig.9 Fig.10

Fig.11 Fig.12 Fig.13 Fig.14

Press

open

pull