Operation Manual

LOCKING & UNLOCKING THE HARNESSES
1. Join the both parts of the harness to each
other and insert them into the buckle. The
buckle is locked when “click” sound is heard.
See / Fig. VI /
Note: When a child is in the child restraint you
must check whether the buckle is still secured.
2. To release the buckle press the red button
on it and pull the both parts out.
To take your child out of the car seat repeat the
operations above in the reverse order:
- Press the red button on the buckle of the
safety belt and release the shoulder belts.
- Put shoulder belts aside and take your child
out of the seat.
TAKING YOUR CHILD OUT OF THE SEAT
ADJUST THE LENGTH OF HARNESSES
In order to protect you child much better, after
fix him/her in the child restraint and lock the
buckle, you should tighten the harnesses so
they are snug and flat against the child’s body.
They should never be twisted or loose.
1.To tighten the harnesses press the button
located on front side of the seat (7a) and pull
the adjustable strap (located on front side of
the seat too) out from the lock (7b).
See / Fig.VII /
2.To lengthen the harnesses press the button
located between child’s legs (7a) and pull both
harnesses to your direction with your other
hand (7c).
Please, note while you are doing this, hold the
harnesses, not the seat cover.
See / Fig.VII /
Shoulder belts
Lap belt
Buckle
Buckle tongue
Crotch belt
SAFETY HARNESS SYSTEM
ADJUST THE HEIGHT OF HARNESSES
There are 3 harness positions available,
you can select according to child’s height.
For group 1 (from 9 to 13 kg) the mounting
height of the harnesses should be adjusted
to the child’s height, so that child’s shoulder
would be at the same level as the harness
coming out from the back. See / Fig. VIII /
( VII )