FORWARD-FACING USER MANUAL ECE R44 04 GROUP WEIGHT AGE 1 9-18 kg 9m-4y 1
Thank you for choosing BeSafe iZi Comfort. Vital information BeSafe has developed this seat with much care, to protect your child during the next phase of her or his life. • It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVATED AIRBAG. • iZi Comfort can be installed only forward-facing with a 3-point car belt, approved to UN/ECE Regulation No. 16 or other equivalent standards. • iZi Comfort is approved in group 1, forward-facing from 9-18 kg.
Preparing to install Forward-facing belt installation Crucial parts It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVATED AIRBAG. Release handle head rest Belt clamp (2x) Adjustable head rest Harness shoulder straps Harness buckle ! 1- When mounting in the back seat of the vehicle, push the front seat of the vehicle forward as much as possible. When mounting in the front seat of the vehicle, adjust the back rest in an upright position.
Removing the seat 5- Put the shoulder belt through the belt clamps. Make sure the belt is not twisted (4). 6- Push the seat firmly into the car seat. 7- Tight installation is most important for forward facing seats. Tension the belts as follows: Pull the shoulder belt upwards (A). Have a firm grip on the shoulder belt in the seat area (B). Close the clamp on the inner side (C). Pull upper belt part on the door side and close clamp D (4).
3- Pull the shoulder straps up while pressing the button of the central adjuster (8). (8) 5- Position the shoulder straps over the orange marking at sides of the seat to keep the harness open while you position the child (9). 8 (11) Make sure that the harness straps are always locked and tightened when the child is in the seat. 4- Open the harness buckle.
Removing and refitting the cover • There are 2 versions of the fabric cover. If there are velcro squares (see green arrow (13/14)), follow the steps of alternative 1. If there are no velcro squares go to alternative 2. Removing the cover: alternative 1 1- Pay attention when you remove the cover, as fitting the cover is done in the opposite way. (13) (14) (15) 2- Start to take off the lower seat part (15).
Cleaning instructions Important advice • The cover of the seat must be washed according to the instructions on the inside of the cover (17). • DO NOT attempt to dismantle, modify or add any part to the seat. Warranty will expire if non-original parts or accessories are used. • DO NOT use anything, such as a cushion, to raise the child seat off the passenger seat of the vehicle. In an accident the seat will not be able to protect your child in the right way.
Guarantee Notes • All BeSafe products are carefully designed, manufactured and tested. All of our BeSafe child seats are tested periodically out of our continuous production in our test laboratory. Furthermore they are tested by independent test institutes. • Should this product prove faulty within 24 months of purchase due to materials or manufacturing fault, except covers and harness straps, please return it to the original place of purchase.
B802-8010-B N2001000 universal 9-18 kg 04443620 HTS BeSafe as N-3535 Krøderen, Norway - www.besafe.
