REARWARD-FACING USER MANUAL ECE R44 04 GROUP 0+ WEIGHT AGE 0-13 kg 0-12 m 1
Thank you for choosing BeSafe iZi Go BeSafe has developed this seat with much care, to protect your child during the first phase of her or his life. It is important that you read this user manual BEFORE installing your seat. Incorrect installation could endanger your child.
Preparing to install Rearward-facing belt installation Crucial parts • It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVATED AIRBAG. Carrying handle Headrest Handle release buttons (2x) Shoulder straps (2x) Harness buckle Baby cushion Hip belt hook (2x) Crotch strap Cover Central adjuster ! 1- Position the seat on the vehicle seat. Make sure the carrying handle is in the carrying position (1).
3- Guide the shoulder belt over the blue part through the shoulder belt hook at the rear side of the seat shell (3). Positioning the child (3) 4- Tighten the 3-point belt by pulling the belt through the hip belt hooks and through the shoulder belt hook until it is really tight (4). • To position your child, you can fold the carrying handle behind the seat in 2 positions, by pressing both handle release buttons (5).
1- Pull the shoulder straps up while pressing the button of the central adjuster (8). (8) 5- Pull the harness strap through the central adjuster in the direction of the green arrow straight up-/forward. Continue pulling until the harness is a comfortable but firm fit (12). (12) 2- Open the harness buckle. 3- Position the shoulder straps over the orange marking at sides of the seat to keep the harness open while you position the child (9).
Using the iZi Go with a stroller • The iZi Go can be installed on a range of strollers. For a complete list check www.besafe.eu Installation on a stroller 1- Align the stroller adapter house above the adapters of the stroller and move straight down, click 2x (16/17). (16) Removing from a stroller 1- Move the carrying handle into carrying position. 2- Push the stroller release up at both sides while lifting the seat vertically from the stroller (18).
Removing and refitting the cover Warning: potential misuse Removing the cover • It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVATED AIRBAG. • DO NOT use the seat positioned in the vehicle, with the carrying handle in a downward position. The handle must be in the vertical carrying position while driving. • Install only with 3-point car belts, approved according to UN/ ECE Regulation No.16 or other equivalent standards (21).
! Important advice Guarantee • DO NOT attempt to dismantle, modify or add any part to the seat. The warranty will not be honoured if non-original parts or accessories are used. • DO NOT use anything, such as a cushion, to raise the child seat off the passenger seat of the vehicle. In the event of an accident the seat will not be able to protect your child properly. • Never leave your child unattended in the seat.
B804-0804-B N2001600 HTS BeSafe as N-3535 Krøderen, Norway - www.besafe.