23 1 2 4 3 5 USER MANUAL 6 7 24 26 11 8 12 10 13 9 14 16 Rearfacing 25 17 18 20 Stature height 61 - 105 cm 15 Max. weight 18 kg Age 6m - 4y UN regulation no.
9 35 42 Thank you for choosing BeSafe iZi Kid i-Size. 43 BeSafe has developed this seat with great care, to protect your child during the first phase of his or her life. !! It is important that you read this user manual BEFORE installing your seat. Incorrect installation could endanger your child.
Preparing to install Crucial parts 1. Adjustable head rest 2. Shoulder straps (2x) 3. Harness buckle 4. Body hugger 5. Front brace 6. Central adjuster 7. Recline lever 8. Ratchet for front brace 9. Cap ISOfix connector (2x) 10. Switch for ISOfix connectors (2x) 11. Floor support 12. Height adjuster floor support 13. Floor support height indicator 14. Release handle head rest 15. Floor support position indicator 16. ISOfix car anchorage (2x) 17. ISOfix insertion clips (2x) (bottom side) 18.
Removing the seat 21. The height indicator of the floor support shows green when the floor support is in contact with the floor. (32) 22. The alarm sound stops when the floor support shows green and is in contact with the floor. 23. Positioned in the back seat of the vehicle, you should, if possible, push the front seat of the vehicle backwards, so that it is in contact with the child seat.
Positioning the child 1. Position of the shoulder straps: Check that the shoulder strap slots are level with your child’s shoulders. • too high (37) • correct (38) 2. The height of the shoulder straps and the head rest can be adjusted by pulling the release handle upwards at the back of the head rest and pulling the head rest up or down while keeping the head rest upright. (39) 3. Pull the shoulder straps up while pressing the button of the central adjuster. (40) 4. Open the harness buckle. 5.
!! Warning: potential misuse • It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVATED AIRBAG. • DO NOT use the seat without floor support. • The floor support must always be used. Make sure that the floor support is fully pushed down. • DO NOT use the seat without tightening the front brace. • Make sure the indicators are green before you drive. !! Important advice • DO NOT attempt to dismantle, modify or add any part to the seat.
Guarantee • All BeSafe products are carefully designed, manufactured and tested. All of our BeSafe child seats are tested periodically out of our continuous production in our test laboratory. Furthermore they are tested by independent test institutes. • Should this product prove faulty within 24 months of purchase due to materials or manufacturing fault, except covers and harness straps, please return it to the original place of purchase.
B1301-8010 N2002450
