FORWARD-FACING USER MANUAL ECE R44 04 GROUP WEIGHT AGE 2-3 15-36 kg 4-12 y 1
Thank you for choosing BeSafe iZi Up FIX Vital information BeSafe have developed this seat with great care to protect your child during the next phase of her or his life. • It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVATED AIRBAG. • iZi Up FIX can only be installed forward-facing with the FIX anchorage in a car equipped with ISOfix anchorage points, in combination with a 3-point belt, approved to UN/ECE Regulation No.16 or other.
Preparing to install iZi Up FIX usage Crucial parts • Check the car manufacturers handbook for detailed information on ISOfix. • The seat can be mounted with the FIX connection in passenger seats equipped with ISOfix car anchorage points. • If the car is not equipped with ISOfix car anchorages the iZi Up FIX can be installed in all passenger seats with a 3-point car belt with the FIX connectors slided in. It is recommended to use the rear seats.
5- Make sure the back of the seat is touching the backrest of the vehicle seat. If the head rest of the vehicle is pushing the seat away from the backrest, adjust or remove the headrest (6). 2- Pull the FIX adjustment handle towards the front of the base. Slide the FIX connectors out of the base as far as they will go (3). (2) (6) (3) click! click! 3- Position the base on the car seat. Click the FIX connectors to the ISOfix anchorage points in the vehicle seat.
Removing the seat Placing the stability strap • In order to install the stability strap, put the iZi Up and the headrest of the car in the most upward position. • Guide the stability strap between the cover and the surface of the iZi Up head rest. • Then guide the strap around both bars of the head rest of the car. • Adjust the iZi Up to the correct height by turning the height adjusting lever. • Tighten the stability strap by connecting the velcro strap as tight as possible (7).
Positioning the child 1- Adjust the backrest and the headrest to the right height by turning the height adjuster lever. Make sure that the shoulder belt is level with your child’s shoulder (14). 4- Remove slack in the belt by pulling the belt towards the retractor (17). (17) (14) Sleeping position 2- Slide the lower part of the shoulder belt guide open and position the belt in the guide. Make sure the belt is not twisted and close the guide again (15).
Removing and refitting the cover Warning: potential misuse Removing the cover • It is NOT ALLOWED to mount the seat in a front passenger seat WITH AN ACTIVATED AIRBAG. • DO NOT guide the car belt around the reclining handles. • DO NOT drive with the iZi Up FIX when any FIX indicators are NOT GREEN (21). • Pay attention when you remove the cover, as fitting the cover is done in the opposite way. • The upholstery of the seat consists of 3 separate parts.
Important advice • DO NOT attempt to dismantle, modify or add any part to the seat. Warranty will expire if non-original parts or accessories are used. • DO NOT use anything, such as a cushion, to raise the child seat off the passenger seat of the vehicle. In an accident the seat will not be able to protect your child in the right way. • Never leave your child unattended in the seat. • Make sure all passengers are informed about how to release your child in case of emergency.
HTS BeSafe as N-3535 Krøderen, Norway - www.besafe.eu 16 B102-8200 N2002210 Guarantee • All BeSafe products are carefully designed, manufactured and tested. All of our BeSafe child seats are tested periodically out of our continuous production in our test laboratory. Furthermore they are tested by independent test institutes.
