User's Manual

封面
SIZE：120X150MM, 材质：128克双铜纸双面4C印刷，中间打两颗钉
封底
MANUFACTURER
Manufacturer: Shenzhen Jianyi Technology Co., Ltd
Address: 401, B#1, 28 Jinhu Road,
Luohu District, Shenzhen, China
Wireless Headset BHF02
User Manual
Wireless Headset BHF02
User Manual
Product Overview: Product Contents:
Charging
How to Pair BHF02 Headset with Smart Phone
BHF02 Headset & PC Adapter Pairing Instruction
1. Activate the USB Audio Adapter
2. Pair BHF02 headset with the USB Audio Adapter
4. BHF02 Headset LED Indicator
Q: Password for pairing:
NOTE:
Product Support:
[e-mail]
Know more about us, you could visit our website:
www.besign-tech.com
5. Attentions and Q & A:
Q: How to Pair if Failed?
3. Button Control:
Specification
BT standard：
V5.0
Standby time：
Around 800H
Charging input：
5V DC ≤500mA
BT protocl：
A2DP \ HFP \ HSP \ AVRCP
Low battery indicator：
Red LED light flashes
Charging time for the
headset：
Around 2H
：
LED Indicator
Microphone
Mute Button
Volume+
PC Adapter
MFB(Multi Function Button)
Type C Charging Port
Volume-
A. Wireless Headset BHF02 x 1
(1) Connect the charging port with any USB charging adapter or
active computer USB port.
(2) Charging will start automatically with LED indicator turning red.
(3) The Headset is fully charged when the red LED indicator
turns off.
Flashing Blue and
Red alternately
Power on
Pairing mode
Connected
LED Blue flashes
LED Red & Blue flashes alternately
LED solid Blue
(1) Plug the USB Audio Adapter into a USB port on your computer,
it will be turned on automatically with blue led light flashing.
(2) Once turned on, the USB Adapter will search and re-connect
the last paired BHF02. For the first time use, the USB adapter
will enter into pairing mode with Blue and Red led light flashing
alternately in around 20 seconds after it is turned on.
B. PC Adapter X 1
C. Micro USB charging cable x 1
D. User manual x 1
Before pairing, please disable the bluetooth function on
your phone/computer previously connected with this
BHF02.
(1) When the BHF02 is powered off, press and hold the
multifunction button for 5 seconds until you see the Blue and
Red led light flashing alternately.
(2) Make these two devices close with each other and the USB
audio Adapter will connect with the headset automatically in
minutes.
Once connected, the indicator on the Adapter will stay solid
blue. The indicator on the headset will flash blue.
3. Automatic Re-Pairing
4. USB Adapter LED Indicator
BHF02 can remember the Adapter paired previously.
After being paired successfully for the first time, make sure the
USB Adapter is plugged in the computer first and then turn on
the BHF02 headset, the auto-connection will be completed in
minutes.
1. Pairing and Connecting
Before pairing, please disable the bluetooth function on your
phone/computer previously connected with this BHF02. Please
also insure the included USB adapter is disconnected with this
BHF02.
Step 1:
When the headset is off, press and hold the Multifunction Button
for 5 seconds to bring the headset into pairing mode with the Led
indicator flashing blue and red alternately.
Step 2:
Turn on bluetooth on your phone - search for new devices.
Step 3:
Find “BHF02” in the search results. Tap on the name to connect.
Once connected, the LED indicator will flash blue once every 4
seconds
•This headset can connect to the last connected smart phone
automatically without going into the pairing mode after it is switch
on. If the automatic connection is failed with your smart phone,
you could open your smart phone bluetooth in the setting and
click this BHF02 to connect it manually or repeat the above
pairing process again.
Note:
2. Clear Pairing History
Function Operation
Power On
Press and hold the Multifunction Button for 3 seconds
Volume + / -
Press the Volume + / - Button
Pause / Play
Press the Multifunction Button
Previous /
Next Track
Press and hold the Volume - / + Button for 2 seconds
Power Off
Press and hold the Multifunction Button for 3 seconds
Redial
Press the Multifunction Button twice
Voice Control
Press and hold the Multifunction Button for 1.5 seconds
Answer Calls
When there is an incoming call, press the Multifunction Button once
End Calls
During a call, press the Multifunction Button once
Transfer Calls
During the calling, press the + about 3s and comes a beep. then the voice
will be transferred to the phone from the headset .The same operation will
transfer the voice from the phone back to the headset with a beep.
Reject Calls
When there is an incoming call, press and hold the Multifunction
Button for 2 seconds
A: You could try 0000 or 8888 or 1111 or 1234 if your bluetooth
device require a password.
Q: How to Mute the Microphone?
Q: How to Restart the Headset if Failed?
Suggested care & Maintenance
During Calling，Long press Mute Button about 1s, the
microphone is mute, long press the same button about 1s again,
the mute is cancelled.
A: Try to charge it via USB cable and then restart it..
● Please power off when not in use or before storing.
● Please keep away from excessive heat and humidity.
● Do not use chemicals or detergents to clean this product.
● Extreme temperatures can shorten lifespan of internal
components.
Correct Disposal of This Product ( Waste Electrical& Electronic
Equipment )(Applicable in countries with separate collection
systems)
This Marking shown on the product or its literature, indicate that
it should not be disposed with other household wastes at the end
of its working life.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.Household user should
contact either the retailer where they purchased this product, or
their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contact. This product should not be
mixed with other commercial wastes for disposal.
Switch on this BHF02 headset, At the same time, long press the
"multi-function" button and the "volume -" button for about 5
seconds, and a "beep" prompt sound is heard, indicating that the
pairing information has been cleared. After the pairing information
is cleared, the product will automatically enter the pairing mode
with red and blue lights flashing alternately.
LED Indicator
Mode
Power on
Power off
Pairing mode
Unconnected standby mode
Connected standby mode
Playing Music
Talking
Charging
Full charged
Low battery
LED Indicator
LED Blue flashes 5 times
LED Red flashes 5 times
LED Red & Blue flashes alternately
LED Blue flashes once every 4 seconds
LED Blue flashes once every 4 seconds
LED Blue flashes once every 8 seconds。
LED Blue flashes once every 7 seconds
Solid LED Red
Red LED turn off
Red LED flashes
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
quipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment. This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
1
8
9
10
11
12
Product Support:
[e-mail]
Know more about us, you could visit our website:
www.besign-tech.com
13
2 3 4
7
30
Operation Range：
10 meters
5S
Mode LED Indicator
(1) Switch on this BHF02 headset, Long press the "Multifunction"
button and the "Volume -" button at the same time for about 5
seconds.
(2) A beep is heard to indicate that the pairing has been cleared.
(3) After clearing the pairing information, the product will
automatically enter the pairing mode with red and blue lights
flashing alternately.
(4) Then re-pair your bluetooth device as instructed in "Pairing
and Connecting".
BHF02
Pair
Flashing Blue and Red alternately
Flashing slowly in blue
Solid blue
5
6