User's Guide

8
omlox WTag User Guide
4. Deployment instructions
4.1. omlox WTag start
omlox WTag starts on motion.
To keep using your WTag, just ensure that the wave form led lights in green: it
means the battery level is high enough to operate.
▶ see table in section 3.1
4.2. omlox WTag placement
One simple golden rule ensures the best results when it comes to the
deployment: avoid UWB signal deterioration and reflection by maximizing Line
of Sight links (LoS) among all the devices included in the system. LoS matters
among omlox Satellites for the quality of synchronization. Of course, it also
matters between omlox Satellites and WTags for the location precision.
Short animation sequences summarizing the points to pay attention to (online content)
4.3. omlox WTag control
omlox WTags are configured and controlled via the Web UI of BeSpoon RTLS or
via another application based on a compatible session protocol.
For more information, please refer to the corresponding documentation. It can
be either the documentation included in the RTLS DELIVERY Pack or the docu-
mentation dedicated to the compatible application.
UWB synchronization
Non-Line of Sight Examples
How to place fixed devices
Dilution of precision