User's Guide

7
omlox SmartAntenna User Guide
BeSpoon RTLS mobile kits (mobile devices as fixed bases)
• At least 5 mobile devices
• Wireless charging devices and/or USB C cables
• Android tablet or smartphone
• PC (if UART transmission only)
• Optional mounting screws – Type: M3 diameter, minimum length 8mm
e.g. Phillips Pozidriv Recess Countersunk Head, DIN 96 - White Zinc Steel
4. Deployment instructions
4.1. omlox SmartAntenna mounting (optional)
If you need to fix the omlox SmartAntenna, 3 screw thread inserts are included
in the device's base.
▶ see illustration at section 3.2
Use all 3 screw thread inserts for each omlox SmartAntenna.
Warning: the equipment should not be used in places hosting children.
4.2. omlox SmartAntenna start
omlox SmartAntenna starts as soon the USB C cable is plugged and the board is
supplied with power.
▶ see table of light indicators at section 3.1
4.3. omlox SmartAntenna placement
One simple golden rule ensures the best results when it comes to the
deployment: avoid UWB signal deterioration and reflection by maximizing Line
of Sight links (LoS) among all the devices included in the system. LoS matters
among omlox Satellites for the quality of synchronization. Of course, it also
matters between omlox Satellites and SmartAntennas for the location precision.
Short animation sequences summarizing the points to pay attention to (online content)
UWB synchronization
Non-Line of Sight Examples
How to place fixed devices
Dilution of precision