Service manual

Shared Standard and Exit Hardware Trim Parts
B.A.S.I.S. V Service Manual 4–5
Control electronics
kits
The control electronics kits described in the table below are used for
both standard B.A.S.I.S. Locks and EX Series Exit Hardware Trim. To
determine whether a lock has B.A.S.I.S. G or B.A.S.I.S. V electronics, see
page 9–10.
Battery kits The Backup Battery Kit is used for both standard B.A.S.I.S. Locks and
EX Series Exit Hardware Trim. The Eight-cell Battery Upgrade Kit is
used only for standard B.A.S.I.S. Locks with brass escutcheons.
Components
Kit name
Part
number
Magnetic stripe control electronics board Smart card control electronics board Dual validation control electronics board HID proximity control electronics board Motorola proximity control electronics board ABA Jumper Backup battery Pull-tab for backup battery Temporary operator card Escutcheon gaskets Mounting plate screw Lift finger screw
B.A.S.I.S. V Magnetic Stripe
Control Electronics Kit
1833487
■ ■■■
†
5
■
B.A.S.I.S. V Smart Card
Control Electronics Kit
1833602
■ ■■■
†
5
■
B.A.S.I.S. V Dual Validation
Control Electronics Kit
1838108
■ ■■■
†
5
■
B.A.S.I.S. V HID Proximity
Control Electronics Kit
1838422
■ ■■■■
†
5
■
B.A.S.I.S. V Motorola Proximity
Control Electronics Kit
1838548
■ ■■■■
†
5
■
†. Kit includes one escutcheon gasket for standard B.A.S.I.S. Locks and one escutcheon gasket for EX Series Exit Hardware
Trim.
Components
Kit name Part number
Backup battery Escutcheon gaskets Mounting plate screw Lift finger screw Eight-cell battery pack Eight-cell battery door
Backup Battery Kit 1833843
■
†
5
■
Eight-cell Battery Upgrade Kit (for
standard B.A.S.I.S. Locks with brass
escutcheons)
1838705
■■
†. Kit includes one escutcheon gasket for standard B.A.S.I.S. Locks and one escutcheon gasket for
EX Series Exit Hardware Trim.