Instructions / Assembly

Cut Edge
Siding Extends 3/4"
Below Bottom Plate
36"
Siding Extends 3-1/2"
Past wall Frame
Tongue Edge
LAP
Edge
Cut a siding panel to a width of 46-1/2"
(save the 'LAP edge') and install. The
siding panel will extend 3-1/2" past the
end of the wall frame.
6. Install another siding panel. Cut
out the door opening.
Step 13 Install Last Siding Panel
Step 12 Apply Siding to Front Wall Frame
1. Measuring from the 'Tongue Edge' cut a siding panel to a width of 46-1/2". Install this
panel with the cut edge extending 3-1/2" past the left end of the wall frame. The siding
should extend 3/4" below the wall plate.
4. Install a full width siding panel. Locate where you want the window and cut the opening.
5. Install another siding panel. Cut the siding out of the door opening, flush with the side
frame and top header.
LAP
Edge