Instructions / Assembly

flush
3. Install 95" long 1x4 white pine trim
boards as corner trim to the rear
walls. Install trim flush with the
siding on the sidewalls.
4. Repeat to install trim boards to the
front wall panel.
Back
Wall
Side
Wall
Filler
1x4 Corner Trim
Step 16 Install Corner Trim
Tie Plate
Step 15 Install 2x4 Tie Plates
1. Cut (2) two 2x4-16' boards to a length of 15'-9" and install on the front and back walls,
as shown below. Use 10d sinkers.
2. Cut a 6' long 2x4 in half and install 3' long 2x4s on the 12' end walls as shown below.
Cut and install a 6' long 2x4 between the 3' long 2x4s.
2x4-3' Tie Plate
Cut 2x4-6' to Fit
IMPORTANT: Lower Trim Must Be Installed Before Installing Roof Gables!
1. Tack 1-1/2" x 48" filler strips on top of the siding on the back wall.
2. Install (2) two 72-3/8" long 1x4 white pine trim boards flush with the siding on the sidewalls
and flush with the top of the 2x4 tie plate. Use 8d galv. nails to install all trim.
2x4-15'-9"' Tie Plate
Flush
1x4 Trim Boards
2x4-15-9"' Tie Plate