Instructions / Assembly

2x4+6'

3. Install the door header at the

top of the door opening.

4. Cut and install (2) two pre-

cut wall studs under door

header.

Install Stud in Center

Step 9 Assemble 12' End Wall (with door opening)

1. Gather the material listed below to assemble the door wall.

8 Pre-cut Wall Studs

4 2x4-6' Boards

1 Door Header from Step 8

1 2x4 Block

2. Install (6) six pre-cut wall studs

between the 2x4-6' boards

where shown. Temporarily

secure the bottom 2x4-6' boards

together with a 2x4 block.

Door Header

Cut pre-cut studs and install

under door header

on both sides

33" to Stud

Screw 2x4

block with 3"

wood screws.

2x4+6'

6. Install a siding panel, leftover from Step 3 , above

the door opening.

7. Install another 4x8 siding panel on the right side

of the wall panel. Cut and remove the siding that

extends into the door opening.

5. Install a 4x8 siding panel on the left side of the wall panel. Before you install the siding,

cut and remove the siding that extends into the door opening.

Cut Siding Flush

With Door Opening

nail

33" to Stud

72" Finished Door Opening